Advertisement
WARNING: The latch must be locked in place to ensure the waterproof seal is
activated – failure to do so may cause water leakage.
8.3. Using the Wi-Fi PODZ
8.3.1 Installing and turning on the Wi-Fi PODZ
1.
Remove your standard PODZ from the back of the
camera and place your Wi-Fi PODZ into the camera
PODZ socket. (follow steps 1 and 2 under section
3.4)
2.
Press and hold the Power
button to turn on your
camera.
3.
Press the Wi-Fi power button on the Wi-Fi PODZ to turn on your Wi-Fi. The
blue LED lights up to indicate the Wi-Fi is warming up. It will take around 15-20
seconds for the Wi-Fi to warm up and become connectable. The LED will flash
when the Wi-Fi function is active or connected.
4.
Press the Wi-Fi power button to turn off the Wi-Fi anytime.
Note: Wi-Fi will drain your camera battery more rapidly when activated. Turn the
Wi-Fi off if you are not using it to change settings or upload content.
8.3.2 Connecting the Camera to Your Computer
1.
Turn on your camera and Wi-Fi PODZ.
2.
Go to the network settings of your PC and choose Wi-Fi settings. Search the
network, find and click "WIFIPODZ".
3.
Enter password "123456789" and to connect to your camera.
4.
Open your Internet browser and input "192.168.1.2". You will then be able to
view the files stored in your camera.
8.3.3 Connecting the Camera to Your Smart Device (Browser)
1.
Turn on your camera and Wi-Fi PODZ.
2.
Go to the network setting of your mobile device and choose Wi-Fi settings.
Search the network, find and click "WIFIPODZ".
3.
Enter password "123456789" to connect to your camera.
4.
Open your Internet browser and input "192.168.1.2" or "wifi.podz". You can now
view the photos and videos stored in your camera.
8.3.4 Connecting the Camera to Your Smart Device (App)
1.
Search iontheaction app in your devices app store.
2.
Download and install the app to your smart device.
3.
Turn on your Wi-Fi PODZ.
4.
Go to the network settings of your device and choose Wi-Fi settings. Search
the network, find and click "WIFIPODZ".
5.
Enter password "123456789" to connect to your camera.
6.
Open your app.
7.
Please refer to the app page for detailed operating instructions.
9. Sealing Your Camera to prevent water damage
The Waterproof Housing (standard PODZ on iON Air Pro 2 camera and Wi-Fi PODZ
in Air Pro 2 Wi-Fi) allows you to operate the camera up to 10 meters or 30 feet under
water. You must seal the camera with the PODZ in order to protect the camera when
using it in wet or moist conditions.
Notes:
1.
The rubber seal on the PODZ forms the waterproof barrier to protect the
camera in wet and underwater conditions. You must keep this seal clean as a
single strain of hair or grain of sand can cause leakage into the product.
2.
After every use in salt water, you will need to rinse the outside of the product
and the seal with non-salt water and dry. Not doing this can cause corrosion in
the product or failure in the seal, in turn, damaging the product.
Warning:
Please ensure you install and lock the PODZ correctly before using the
camera to avoid water damage. Failure to properly seal your camera can
result in leaks that damage or destroy your camera. Your warranty does
not cover water damage resulting from user damage.
10. Troubleshooting
Problems
Causes
Solutions
1. LED flashes and the
camera turns off
Battery is depleted
Recharge the camera
2. The iON camera will not
turn on.
Red LED flashes during
Low battery
Recharge the camera
recording
Cannot take photos or
Replace with a memory card
Memory full
video (Green LED flashes)
with space available .
1. MicroSD card is not
Cannot take photos or
1. Insert a MicroSD card
inserted
video (Green and Red
2. Format the MicroSD card
2. MicroSD card has not
LED flashes alternatively)
on a PC
been formatted properly.
1. Make sure all cable
Cannot find removable
connections are secured and
disk after connecting the
Connection failure.
restart the computer if
camera to the computer.
necessary.
2. Try a different USB port.
11. Specifications
Sensor
14 Mega pixel sensor
Lens
180º super wide angle field of view
Focus range
0.4m - ∞
1080p: 1920x1080 pixels (16:9), 30 fps
960P*: 1280x960 pixels (4:3), 30 fps
720p: 1280x720 pixels (16:9), 60 fps
Video
720p *: 1280x720 pixels (16:9), 30 fps
Format: H.264 compression, saved as MPEG4 (.mp4) file
Dual video files for easy sharing
16.0 Mega Pixels:(4608x3456)
14.0 Mega Pixels(4384 x3288)
5.0 Mega Pixels: (2592x1944)
Photo
VGA:(640 x480)
Format: JPEG
Capture Modes: Single, Burst-shot*, Time lapse*
Built-in high quality microphone
Audio
2.5mm External microphone (not included)
AAC Compression, Automatic Gain Control
MicroSD/MicroSDHC with minimum Class 6 up to 32GB (not
included)
Storage
Average Recording Times: about 4 hours (using 32GB mSD
card in 1080p30/720p60)
USB2.0 (for data connection and battery charging)
Connection
HDMI
External Microphone
Built-in 1200 mAH Rechargeable Li-Polymer Battery
Power
Battery Life: Approx. 2 hrs/( 1 hr when operating with Wi-Fi
PODZ in Air Pro 2 Wi-Fi)
High quality Aluminum barrel and rubberized finishing
Housing
Depth up to 30 feet / 10 meters
Dimension
40 x 40 x 108 mm
Weight
~127.8(w/ PODZ), ~133.2g (w/ Wi-Fi PODZ)
* Settings can be changed through iON software or Mobile Apps.
12. System Requirements
Operating system
Windows® 7/XP SP3 /Vista and Mac 10.5 or above
CPU
Pentium III or above
RAM
At least 64MB
Interface
USB 2.0 port
Advertisement
