Usb Tethering - Zte N818S User Manual

 Show Password: Check or uncheck to
display or hide the password.

Broadcast network name(SSID):
Broadcast or hide your network SSID. If
the broadcast is disabled, other users
need to get your network SSID to find
the Wi-Fi hotspot.
4. Touch SAVE to save your settings.
NOTE:
You can touch Manage users to manage the
users connected to your phone, set the
maximum connections, and configure
advanced options.
Connect to Hotspot
1. From the home screen, touch
Settings > Hotspot.
2. Touch the Wi-Fi Hotspot slider to activate
the service. The hotspot icon
appear in the status bar.
NOTE:
The best way to keep using the phone as a
hotspot is to have it connected to a power
supply.
3. Enable Wi-Fi (wireless) functionality on
your target device (laptop, media device,
etc.).
4. Scan for Wi-Fi networks from the device
and select your phone hotspot from the
network list.
5. Select this phone and follow your
onscreen instructions to enter the
password (as configured when setting up
the Hotspot feature).

6. Launch your web browser to confirm you
have an Internet connection.

USB Tethering

You can access the Internet on your
computer via the USB tethering feature of
your phone. The feature needs mobile data
connection.
>
NOTE:
You cannot transfer files between your phone
and your computer via USB while the phone
is USB tethered.
will
1. Connect your phone to your computer
with a USB cable.
2. From the home screen, touch
Settings
3. Turn on USB tethering. A new network
connection will be created on your
computer.
NOTE:
To stop sharing your data connection, turn off
USB tethering or disconnect the USB cable.
56 - Web and Data
If your target device supports Wi-Fi
Protected Setup, touch the WPS icon
on the device, and then touch WPS
Push Button on your phone's Wi-Fi
menu.
> More.
>