– Failed—if the engine ECU determines
that a recovery regeneration cannot
be completed, the module displays
the Regen Failed—See Dealer screen
(Figure
19). Take the machine to an
Authorized Service Dealer.
1. Regen Failed—See Dealer
Menu Selection Screen
The Menu Selection Screen displays when you place
the motion-control levers in the N
and press and hold the 2 outside LDU buttons.
1. Outside buttons
The Menu Selection Screen allows you to cycle
through the different menu options by pressing the
toggle button. When the desired menu option is
highlighted, press the enter button to select it.
Note:
All menu options are locked if the
motion-control levers are not in the N
position.
Press and hold the 2 outside buttons to return to the
default screen.
Figure 19
-L
EUTRAL
OCK
Figure 20
2. Menu selection screen
EUTRAL
The menu selection screen allows you to cycle
through the following screens.
•
Maintenance and Service Menu (page 9)
•
Gauges and Meters Menu (page 12)
•
Advanced Settings Menu (page 14)
g216680
1. Maintenance and Service
2. Gauges and Meters
3. Advanced Settings
Maintenance and Service Menu
position
You can scroll between the following screens in the
Maintenance and Service menu:
•
Status of Inputs (page 9)
•
Status of Outputs (page 10)
•
Current Error Messages (page 10)
•
Hydraulic Trans Oil (page 10)
•
Engine Oil (page 11)
•
Machine Information (page 11)
•
Module Information (page 11)
Status of Inputs
This screen lists all of the inputs to the system and
highlights which is currently active. Inputs with
numerical values display the current value.
g228165
1. Status of Inputs
-L
OCK
2. PTO Switch
3. Neutral
4. Oil Pressure
9
Figure 21
4. Cancel/Exit
5. Toggle between screens
6. Enter/Return
Figure 22
5. Brake
6. Previous
7. Toggle between screens
8. Next
g038651
g030183