Toro 74060 Software Manual page 8

time cancels the process and prompts
you to engage the parking brake and
move the motion-control levers to the
N -L
EUTRAL
Figure 14
1. Set brake and neutral
C. Ensure that the blades are disengaged.
D. Ensure that the machine has at least 1/4
tank of fuel.
E. Select Y (yes) from the Start Regen
screen to confirm the regeneration
process (Figure
Figure 15
1. DPF Soot %
2. Start Regen?
The regeneration process begins and the
module displays the Regen Active screen
(Figure 16). Pressing the cancel button
cancels the process.
Figure 16
1. Regen Active
position (Figure 14).
OCK
15).
3. Previous
4. Next
2. Cancel
One of 3 outcomes result:
– Complete—if the process completes
successfully, the module displays the
Regen Complete screen
It includes a 5-minute countdown bar
graph.
Note:
5-minute countdown timer on the screen
expires, the engine shuts off.
g216674
1. Regen Complete
– Interrupted—if you interrupt the
process, the module displays the Regen
Interrupted screen
If you initiated the process, the module
exits the process. If the process was
initiated by the engine ECU, the ECU
places the engine in limp mode and
requests a recovery regeneration.
g217322
1. Regen Interrupted
g216678
8
(Figure
If you take no action and the
Figure 17
(Figure 18).
Figure 18
17).
g216679
g216681