Combi Shuttle 8035 Series Instruction Manual
  1. Manuals
  2. Brands
  3. Combi Manuals
  4. Car Seat
  5. Shuttle 8035 Series
  6. Instruction manual

Combi Shuttle 8035 Series Instruction Manual

Infant car seat 35 lbs. or less,
Hide thumbs Also See for Shuttle 8035 Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
Enlarged version
Keep this instruction manual for future use.
Store in the pocket at the back of the infant car seat.
© 2011 Combi USA, Inc.
Combi USA, Inc.
• 3520 Westinghouse Blvd., Suite B • Charlotte, NC 28273
• For technical questions, call 1-800-992-6624
• Fax 1-704-697-1695 • www.CombiUSA.com
Instruction
Storage Pocket
CCS0262G 09/11
Shuttle
Infant Car Seat
™
Shuttle
8035 Series
™
Instruction Manual
35 lbs. or less
(16 kg o menos)
WARNING
Correct installation and use
•
can be a matter of Life or
Death!
• Read and understand these
instructions before using
this car seat.
• Certified for use in motor vehicles
and aircraft.
• Meets or exceeds all applicable
requirements of Federal Motor
Vehicle Safety Standard 213.
Para instrucciones en Español,
llamar al: 1-800-992-6624
or log onto www.CombiUSA.com.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Shuttle 8035 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Combi Shuttle 8035 Series

Summary of Contents for Combi Shuttle 8035 Series

  • Page 1 • Certified for use in motor vehicles Store in the pocket at the back of the infant car seat. and aircraft. • Meets or exceeds all applicable © 2011 Combi USA, Inc. CCS0262G 09/11 requirements of Federal Motor Vehicle Safety Standard 213.

  • Page 2: Table Of Contents

    Section 1 - Table of Contents Section 1 - Table of Contents (continued) Section 1. Table of Contents................1 Section 13. Operation and Adjustments............52 13a. Harness Use and Adjustment..........52 Section 2. Warnings..................3 13b. Harness - Changing Length, Shoulder Harness Slots Section 3. Shuttle Infant Car Seat and Base Parts.........5 ™...

  • Page 3: Warnings

    Section 2 - Warnings Section 2 - Warnings (continued) WARNING • For proper harness fit: - DEATH or SERIOUS INJURY can occur - Shoulder harness slots MUST be positioned at or just below top of shoulders. Maximum 1 inch (25 mm) below shoulders. •...

  • Page 4: Section 3 - Shuttle Infant Car Seat And Base Parts

    Section 3 - Shuttle Infant Car Seat and Base Parts Section 3 - Shuttle Infant Car Seat and Base Parts (continued) Infant Car Seat (Back) Infant Car Seat (Front) Child Identification Carry Handle Instruction Label Manual (Fill out and Adjustable Chest Clip place on Headrest Pad...
  • Page 5 Section 3 - Shuttle Infant Car Seat and Base Parts (continued) Section 3 - Shuttle Infant Car Seat and Base Parts (continued) Infant Car Seat Base (Top) Infant Car Seat Base (Back) LATCH Storage Vehicle Compartment Belt Path LATCH Lower LATCH Opening Anchor Belt...

  • Page 6: Section 4 - Proper Use Check List

    NEED HELP? car seat labels. • Use this infant car seat rear-facing only when installed in a vehicle. Contact Combi CARE Line at 1-800-992-6624 or one of the following • Snugly adjust harness straps around infant. sources: • Base MUST be used with car seat for infant over 22 pounds (10 kg).

  • Page 7: Section 6 - Use Recommendations

    Section 6 - Use Recommendations Section 7 - Securing Infant In Car Seat WARNING WARNING - DEATH or SERIOUS INJURY can occur - DEATH or SERIOUS INJURY can occur • Base MUST be used with car seat for infant over 22 pounds •...

  • Page 8: 7A. Shoulder Harness Adjustment For Proper Fit

    • DO NOT use accessories or parts other than those changing shoulder harness slot location in headrest. provided by Combi USA or Strolee. Use of accessories or parts from other manufacturers could alter the performance - Shoulder harness slots MUST be positioned of the car seat.

  • Page 9: 7B. Securing Infant In Car Seat

    Section 7 - Securing Infant In Car Seat (continued) Section 7 - Securing Infant In Car Seat (continued) To Adjust Headrest and Shoulder Belt Height: 7b. Securing Infant in Car Seat: 1. Turn Headrest Adjustment Knob clockwise Loosen harness - Press Harness Adjuster Lever (right) until it stops.
  • Page 10 Section 7 - Securing Infant In Car Seat (continued) Section 7 - Securing Infant In Car Seat (continued) Close Chest Clip and position Chest Clip Insert Buckle Tongues into buckle one at a time (fig. e). at arm pit level (fig.

  • Page 11: Section 8 - Selecting A Vehicle Seating Location

    Section 8 - Selecting A Vehicle Seating Location Section 8 - Selecting A Vehicle Seating Location (continued) WARNING Refer to vehicle owner’s manual for car seat installation instructions - DEATH or SERIOUS INJURY can occur for your vehicle. - Use car seat in a rear vehicle •...

  • Page 12: Latch System

    Section 8 - Selecting A Vehicle Seating Location (continued) Section 8 - Selecting A Vehicle Seating Location (continued) 2. Vehicle Seat Belt: Options For Securing A Car Seat: This car seat can be secured to a vehicle using the LATCH System The car seat with the base or without the base can be secured or a vehicle seat belt.
  • Page 13 Section 9 - LATCH System Section 9 - LATCH System (continued) LATCH System On This Car Seat: LATCH Anchorage System In Vehicles: Child restraint anchorage system or LATCH The LATCH System on the Shuttle Infant ™ System in the vehicle consists of two lower Car Seat Base consists of a lower anchor anchors located at the vehicle seat bight...

  • Page 14: Section 10. Attachment Of Car Seat To Base

    Section 10 - Attachment of Car Seat to Base Section 10 - Attachment of Car Seat to Base (continued) Removal Of Car Seat From Base: With child facing the rear of the vehicle, lower car seat into base and push down on car seat Pull Car Seat Release Handle to lock car seat into base (fig.

  • Page 15: Section 11. Installation Of The Car Seat In Vehicle

    Section 11 - Installation of Car Seat in Vehicle Section 11 - Installation of Car Seat in Vehicle (continued) WARNING 11a. Adjusting Base for Proper Car Seat Recline: - DEATH or SERIOUS INJURY can occur Base installation angle and car seat recline: •...
  • Page 16 Section 11 - Installation of Car Seat in Vehicle (continued) Section 11 - Installation of Car Seat in Vehicle (continued) Line for 22 lbs. The recline indicators use a liquid bubble Proper installation and car seat recline depends on infant’s weight. or less and two printed black lines marked “22”...
  • Page 17 Section 11 - Installation of Car Seat in Vehicle (continued) Section 11 - Installation of Car Seat in Vehicle (continued) With bottom of Base and Recline To adjust the base installation angle and car seat recline: Adjustment Foot in contact with vehicle seat, grasp front corner of Identify the black line on Recline Indicator that will provide the Base at the belt path opening (fig.

  • Page 18: 11B. Securing Base With Latch System (35 Lbs. Or Less)

    Section 11 - Installation of Car Seat in Vehicle (continued) Section 11 - Installation of Car Seat in Vehicle (continued) 11b. Securing Base with LATCH System - 35 lbs. (16 kg) or less: If vehicle seat back is adjustable, adjust WARNING vehicle seat back into most upright position.
  • Page 19 Section 11 - Installation of Car Seat in Vehicle (continued) Section 11 - Installation of Car Seat in Vehicle (continued) Route LATCH Belt in Base Belt Path: Vehicle Place base rear-facing in the vehicle seat location Belt Path selected with the Adjustable Recline Foot against Opening - Slide end of Lower Anchor Belt vehicle seat back and centered between the...
  • Page 20 Section 11 - Installation of Car Seat in Vehicle (continued) Section 11 - Installation of Car Seat in Vehicle (continued) Adjust Base installation angle to center Bubble on the black line Tighten lower anchorage belt to secure the base. for infant’s weight. To adjust see “Adjusting Base for Proper Car Seat Press down in center of Base to depress the Recline”...
  • Page 21 Section 11 - Installation of Car Seat in Vehicle (continued) Section 11 - Installation of Car Seat in Vehicle (continued) Storage Of Lower Anchorage Belt And Lower Anchor Connectors: Removal Of Base Installed With LATCH: To store the LATCH lower anchor belt Loosen Lower Anchor Belt: and connectors, lift LATCH Storage - While pressing down in center of base to reduce...

  • Page 22: 11C. Securing Base With Vehicle Seat Belt (35 Lbs. Or Less)

    Section 11 - Installation of Car Seat in Vehicle (continued) Section 11 - Installation of Car Seat in Vehicle (continued) 11c. Securing Base With Vehicle Seat Belt - 35 lbs. (16 kg) or less: Check Base installation angle (car seat recline). WARNING Bubble in Recline Indicator must be centered on - DEATH or SERIOUS INJURY can occur...
  • Page 23 Section 11 - Installation of Car Seat in Vehicle (continued) Section 11 - Installation of Car Seat in Vehicle (continued) Vehicle Secure Base with Vehicle Lap Belt. To secure Base with Vehicle Vehicle Belt Guid Vehicle Vehicle Lap and Shoulder Belt: Belt Guid Belt Path Belt Path...

  • Page 24: 11D. Securing Car Seat Without Base (22 Lbs. Or Less)

    Section 11 - Installation of Car Seat in Vehicle (continued) Section 11 - Installation of Car Seat in Vehicle (continued) 11d. Securing Infant Car Seat Without Base - 22 lbs. (10 kg) or less: Check for secure installation. Pull base front WARNING to back and left to right to check for secure installation (fig.
  • Page 25 Section 11 - Installation of Car Seat in Vehicle (continued) Section 11 - Installation of Car Seat in Vehicle (continued) To secure car seat with Vehicle Lap Belt: Tighten the vehicle lap belt around car seat. Press down firmly on car seat to compress To secure car seat with Vehicle Lap and vehicle seat cushion while tightening vehicle Shoulder Belt, go to step 5.

  • Page 26: Section 12. Stroller Or Travel System Use

    • DO NOT use car seat without base for infant over 22 pounds (10 kg). Death or serious injury can occur. This infant car seat can only be used with certain Combi stroller models • Base MUST be used for infant over 22 pounds (10 kg).

  • Page 27: Section 13. Operation And Adjustments

    Section 12 - Stroller or Travel System Use Section 13 - Operation and Adjustments To attach car seat to Stroller: 13a. Harness Use and Adjustment: WARNING Lock stroller wheels to prevent stroller movement. - DEATH or SERIOUS INJURY can occur Hold car seat above the mounting points on stroller.
  • Page 28 Section 13 - Operation and Adjustments (continued) Section 13 - Operation and Adjustments (continued) 13b. Harness - Changing Length, Shoulder Harness Slots and Removal: • To loosen: Press harness adjuster WARNING lever , and pull harness straps (fig. b). - DEATH or SERIOUS INJURY can occur Harness •...
  • Page 29 Section 13 - Operation and Adjustments (continued) Section 13 - Operation and Adjustments (continued) To change Harness Strap length: To change Shoulder Harness Slot height: Upper Each shoulder harness strap has Shoulder harness slots MUST be positioned at or just below top of Loop two sewn loops at the end (fig.

  • Page 30: 13C. Carry Handle Operation

    Section 13 - Operation and Adjustments (continued) Section 13 - Operation and Adjustments (continued) To reattach harness: 13c. Carry Handle Operation: WARNING 1. Adjust headrest so Shoulder Harness Slots in headrest line up with Shoulder Harness Slots in - DEATH or SERIOUS INJURY can occur seat back (see “Shoulder Harness Shoulder Adjustment for Proper Fit”...

  • Page 31: 13D. Canopy Removal And Assembly

    Section 13 - Operation and Adjustments (continued) Section 13 - Operation and Adjustments (continued) 13d. Canopy Removal and Assembly: To change carrying handle position: • Push in handle adjustment buttons on each Some models have a canopy with plastic stays that (fig.
  • Page 32 Section 13 - Operation and Adjustments (continued) Section 13 - Operation and Adjustments (continued) Canopy 3. Rotate Canopy Stay outward 2. Rotate up into position parallel Pivot Slot and slide out of Canopy Pivot to the Canopy Pivot and press Slot (fig.

  • Page 33: 13E. Seat Cushion

    Section 13 - Operation and Adjustments (continued) Section 14 - Vehicle Seat Belts 13e. Seat Cushion: Design and operation of vehicle seat belt systems vary from vehicle to WARNING vehicle and from seating location to seating location in the same vehicle. Not all vehicle seat belts can be used with a child restraint.
  • Page 34 Section 14 - Vehicle Seat Belts (continued) Section 14 - Vehicle Seat Belts (continued) Belts Forward of Seat Bight Combination Lap/Shoulder Belt with Free Sliding Latch Plate Pull out on latch plate. If belt slides freely Vehicle seat belts located forward of seat bight Seat through latch plate (fig.
  • Page 35 Section 14 - Vehicle Seat Belts (continued) Section 14 - Vehicle Seat Belts (continued) Combination Lap and Shoulder Belt with Locking Latch Plate Passive Restraints Vehicle seat belts with locking latch plates Lap Belt with Motorized Shoulder Belt (fig. k) (fig.
  • Page 36 Section 14 - Vehicle Seat Belts (continued) Section 14 - Vehicle Seat Belt Systems (continued) Lap Belts - With Retractor Lap Belts - Manually Adjustable Lap belts with retractors (fig. p) may or may not Manually adjustable lap belts (fig. n) normally hold a car seat securely.

  • Page 37: 14A. Locking Clip

    Section 14 - Vehicle Seat Belts (continued) Section 14 - Vehicle Seat Belts (continued) 14a. Locking Clip (stored on back of car seat): Slide locking clip onto vehicle seat belts approximately 1/2 inch (1 cm) away from latch plate (fig. b). You MUST use locking clip provided with this car seat with a vehicle belt that slides freely through the latch plate or if the lap portion of the lap/shoulder Slide vehicle belt back into vehicle lap belt guide...

  • Page 38: Section 15. Additional Information

    Section 15 - Additional Information Section 16 - Care and Cleaning CLEANING SEAT PAD AND HEADREST PAD 15a. CERTIFICATION - To remove seat pad first detach shoulder straps (see “Harness - - This car seat meets or exceeds all applicable requirements of Federal Changing Length, Shoulder Harness Slots and Removal”...

  • Page 39: Section 17. Re-Use After A Crash

    Restraint Re-use criteria has not been met, or if there is uncertainty whether • Log onto the National Highway Traffic Safety Administration recall damage to the seat has occurred, NHTSA and Combi USA advise parents or website at: caregivers to contact their automobile insurance company regarding its policy www-safercar.gov and follow links to Child Restraint Recalls.

  • Page 40: Section 19. Limited Warranty

    BUYERS REMEDIES UNDER THE LIMITED WARRANTY ABOVE ARE EXCLUSIVE AND ARE STRICTLY LIMITED TO REPAIR OR 2. During the warranty period your Combi product will either be repaired or REPLACEMENT AS STATED. ANY INCIDENTAL OR CONSEQUENTIAL replaced, at the warrantor’s discretion, without charge if it is purchased...

Table of Contents