Combi Coccoro 8220 Series Manual

Convertible car seat

Hide thumbs Also See for Coccoro 8220 Series:

Instruction manual (81 pages)

Manual (80 pages)

Table Of Contents

Table of Contents

Quick Links

Need help?

Do you have a question about the Coccoro 8220 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Combi Coccoro 8220 Series

Page 1 2008 Combi USA, Inc. CCS0210B - 12/08 requirements of Federal Motor Combi USA, Inc. • 1962 Hwy 160 West, Suite #100 Vehicle Safety Standard 213. • Fort Mill, SC 29708-8027 • For technical questions, call 1-800-992-6624 • Se Habla Español 1-803-548-6633 •...
Page 2: Table Of Contents
Section 13. Operation and Adjustments Section 1 - Table of Contents 13a. Harness Use and Adjustment.............46 13b. Changing Harness Slot Positions..........49 Section 1. Table of Contents................1 13c. Infant Insert (Use with infants less than 15 lbs. (6.8 kg).....54 Section 2. Warnings..................3 Section 14.
Page 3: Warnings
(2.3 and 18 kg) and whose height is 40 inches (102 cm) or less. • DO NOT use accessories or parts other than those provided by Combi USA, Inc. Use of accessories or parts from other • Discontinue use when child’s weight exceeds 40 pounds manufacturers could alter the performance of the car seat.
Page 4: Section 3 - Proper Use Check List
NEED HELP? WARNING - DEATH or SERIOUS INJURY can occur Contact Combi USA Consumer Service at 1-800-992-6624 or one of the following resources: WARNING: AIR BAGS • Your vehicle dealer to locate a child safety seat Inspection station in your •...
Page 5: Section 5 - Car Seat Parts
Top Tether Section 5 - Car Seat Parts Strap Harness Seat Pad Strap Upper Upper Covers Shoulder Shoulder Belt Guide Belt Guide Harness Slots Shoulder Shoulder Belt Slots Shoulder Belt Slots Harness Straps Lower Lower Buckle Tongue Child ID Shoulder Shoulder Storage Loop Label...
Page 6 Tether Hook Tether Strap Adjuster Instruction Manual Infant Rear-facing Insert Tether Belt Lock-off Storage Pocket Forward-facing for Instruction Manual, Shoulder Tether and Rear-facing Belt Lock-off Belt Lock-off LATCH Storage Pocket (Under Seat Pad) LATCH Hook-on Connector Harness Cover (Removed to show Harness) Metal Harness Shoulder...
Page 7: Section 6 - Use Recommendations
Rear-facing Use: 5 to 33 lbs. (2.3 to 15 kg) Section 6 - Use Recommendations • All infants less than one year old and 20 lbs. (9 kg) MUST be rear-facing. WARNING • Infant insert MUST be used for infants less than - DEATH or SERIOUS INJURY can occur 15 lbs.
Page 8: Section 7. Preparing Car Seat For Use
Forward-facing Use - Toddlers over 20 lbs. (9 kg): Section 7 - Preparing Car Seat For Use WARNING - DEATH or SERIOUS INJURY can occur The Coccoro Car Seat is color coded to identify use information and vehicle belt path locations for both rear-facing and forward-facing use. •...
Page 9: Section 8 - Selecting A Vehicle Seating Location
- For vehicles with air bags, always follow child restraint Section 8 - Selecting A Vehicle Seating Location DO NOT place rear-facing child seat installation information provided on front seat with air bag. DEATH OR in vehicle owner’s manual. SERIOUS INJURY can occur. WARNING The back seat is the safest place for - DEATH or SERIOUS INJURY can occur...
Page 10: Section 9. Latch System
Top Tether Information: Options For Securing A Car Seat: If a top tether anchor is not available in your Top Tether This car seat can be secured to a vehicle using the LATCH System vehicle, the car seat MUST be secured with Strap or a vehicle seat belt.
Page 11: Latch System
LATCH Anchorage System In Vehicles: Section 9 - LATCH System Child restraint anchorage system or LATCH System in the vehicle consists of two lower anchors located at the vehicle seat bight and a top tether LATCH System On This Car Seat: anchor (fig.
Page 12: Section 10. Rear-Facing Installation
Lower Refer to vehicle owner’s manual to identify the seating Anchors Section 10 - Rear-facing Installation locations with LATCH Anchorage System. Select the seating location to be used and locate the vehicle lower anchors at the seat bight (fig. a) for that seating Section 10a - Rear-facing Installation With LATCH location.
Page 13: Rear-Facing Installation With Vehicle Seat Belt
Check recline angle of car seat. Recline reference line on side of seat MUST be Store tether in storage pocket on back of car seat. horizontal (fig. j). If recline reference Recline See “Tether Storage” at the end of this section. Reference line is not horizontal, readjust or place Rear-facing...
Page 14 Storage Of Lower Anchor Belt And Connectors: Removal Of Car Seat Installed With LATCH: When not using the LATCH System, store the lower Pull anchor belt and hook-on connectors by removing Loosen lower anchor belt by tipping adjuster and lower anchor belt and connectors from rear-facing pulling out lower anchor belt (fig.
Page 15 Front of Pad Place the vehicle lap belt into the Folded Back Section 10b - Rear-facing Installation With Vehicle Seat Belt rear-facing belt path. Rear-facing WARNING - Lift and fold front of seat pad back Belt Path into car seat to access belt path by - DEATH or SERIOUS INJURY can occur unsnapping front and unhooking sides of pad (fig.
Page 16 Check for secure installation. Gripping car seat at top of armrest, pull car seat front to back and left For lap and shoulder belt, place the vehicle shoulder belt around back of Coccoro with the shoulder belt to right to check for secure installation (fig. k). Vehicle lap belt MUST stay tight.
Page 17: Section 11. Forward-Facing Installation
After selecting a seating location, if vehicle seat back is adjustable, adjust seat back Section 11 - Forward-facing Installation into most upright position. Section 11a - Forward-facing Installation With LATCH Remove LATCH Hook-on connectors from the WARNING pocket on right side of the seat pad (fig. c). - DEATH or SERIOUS INJURY can occur Remove top tether from storage pocket and place in seating area of car seat.
Page 18 Upper Attach tether hook (A) to vehicle top tether anchor Pull to Shoulder Place car seat forward-facing in the vehicle hardware (B) (fig. j) and pull strap to remove slack tighten Belt seat location selected with forward-facing from top tether. Check that the tether strap is not Guide belt path toward vehicle seat back and twisted.
Page 19 Remove hook-on connectors from vehicle Check for secure installation. Gripping car seat at lower anchors. the belt path, pull car seat front to back and left to right to check for secure installation (fig. l). - Press and hold the connector retainer spring LATCH belt MUST stay tight.
Page 20 Position car seat so both the upper shoulder belt Section 11b - Forward-facing Installation With Vehicle Seat Belt guides and lower shoulder belt guides contact WARNING vehicle seat back (fig. c). - DEATH or SERIOUS INJURY can occur Forward-facing Belt Path Thread vehicle lap belt (fig.
Page 21 - While pressing down in center of Upper car seat to compress the vehicle seat Attach tether hook (A) to vehicle top tether anchor Shoulder cushion (fig. g), pull on shoulder belt hardware (B) (fig. e) and pull strap to remove slack Pull to Belt to tighten lap belt.
Page 22: Section 12. Securing Child In Car Seat
Retainer Spring • Do not use accessories or parts other than those provided by Combi USA. Use of accessories or parts from other (fig. l) manufacturers could alter the performance of the car seat. • Never leave child unattended, even when sleeping.
Page 23 Loosen harness: Check position of harness: Harness - While pressing on harness adjuster Adjuster •Rear-facing pull out on shoulder harness strap (fig. d). - Shoulder harness straps must be through harness slots at or below child’s shoulders (fig. a). See “Changing Shoulder Harness Position” (fig.
Page 24: Section 13. Operation And Adjustments
Section 13 - Operation and Adjustments Buckle Harness: - Place top of buckle tongues together and insert 13a. Harness Use and Adjustment buckle tongues into buckle (fig. g). WARNING You should hear a click. - DEATH or SERIOUS INJURY can occur - Pull up on tongues to be sure they are locked.
Page 25 Chest Clip Operation: Harness Strap Adjustment • To open: - Press tabs and pull apart • To tighten shoulder harness straps: • To close: - Snap halves together. - Pull harness adjuster strap (fig. b). - Make sure chest clip is locked by pulling out.
Page 26: 13B. Changing Harness Slot Positions
Removal of shoulder harness straps: 13b. Changing Harness Slot Positions 1. Release buckle and unbuckle chest clip. •Rear-facing 2. Removal of shoulder harness straps. - Shoulder harness straps must be a. Lengthen shoulder harness straps to through harness slots at or just maximum length.
Page 27 4. Select loops on shoulder harness straps Reassembly of shoulder harness straps: to be used. - Use the upper loops for smaller children. WARNING Upper - Use the lower loops for larger children. Loop - DEATH or SERIOUS INJURY can occur 5.
Page 28: 13C. Infant Insert (Use With Infants Less Than 15 Lbs. (6.8 Kg)
13c. Infant Insert WARNING 6. Pull harness adjuster strap located at front of seat to tighten the harness. Verify proper operation, tightening, and that belts are not - DEATH or SERIOUS INJURY can occur twisted. • For proper harness fit and to prevent ejection: - Infant insert MUST be used for infants less than 15 lbs.
Page 29: Section 14. Vehicle Seat Belts
Belts Forward of Seat Bight Section 14 - Vehicle Seat Belts Vehicle seat belts located forward of Seat seat bight (fig. a & b) may not securely Bight Design and operation of vehicle seat belt systems vary from vehicle to vehicle hold car seat.
Page 30 Passive Restraints Lap Belts - With Retractor Lap or Shoulder Belt Mounted on Front Door (fig. f) Lap belts with retractors (fig. d) may or may not hold a DO NOT use with any car seat. Belts will not stay car seat securely.
Page 31: Rear-Facing Belt Lock-Off
Rear-facing Belt Lock-off Combination Lap/Shoulder Belt with Locking Latch Plate WARNING - DEATH or SERIOUS INJURY can occur Vehicle seat belts with locking latch plates (fig. j) normally hold a car seat tightly. Avoid serious injury or death: However in some cases, the locking latch plate on some seat belts may slip and loosen •...
Page 32: Section 15. Additional Information
Section 15 - Additional Information With arrow facing towards vehicle latch plate, position rear-facing belt lock-off around shoulder belt, close cover Certification over shoulder belt and lock in place by rotating locking tab up (fig. c). This car seat meets or exceeds all applicable requirements of Federal Motor Vehicle Safety Standard 213 for use in motor vehicles.
Page 33: Section 16. Care And Cleaning
1-803-548-3663 excess water and lay flat to dry. Cleaning Harness Straps: or log onto www.combi-intl.com Surface wash only with mild soap and damp cloth. For recall information: If harness straps are frayed or heavily soiled, they MUST be replaced.
Page 34: Section 18. Re-Use After A Crash
ALL conditions in “Re-use After A Crash” section of this manual. Do not sell or allow 2. During the warranty period your Combi product will either be repaired or others to use a car seat that has been in a crash and does replaced, at the warrantor’s discretion, without charge if it is purchased...
Page 35 THE WARRANTY PROVIDED HEREIN IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED. WARRANTOR’S OBLIGATIONS AND THE CONSUMER’S OR OTHER BUYERS REMEDIES UNDER THE LIMITED WARRANTY ABOVE ARE EXCLUSIVE AND ARE STRICTLY LIMITED TO REPAIR OR REPLACEMENT AS STATED.

Combi Coccoro 8220 Series Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Combi Coccoro 8220 Series

Summary of Contents for Combi Coccoro 8220 Series

Table of Contents