Resetting The Lamp Timer - BenQ TH671ST User Manual

13. Tighten the screw that secures the lamp cover.
• Loose screw may cause a bad connection, which could
result in malfunction.
• Do not over tighten the screw.
14. .Connect the power and restart the projector.

Resetting the lamp timer

15. After the startup logo, open the On-Screen Display
(OSD) menu. Go to Advanced Menu - System Setup : Advanced > Lamp Settings and
press OK. The Lamp Settings page appears. Highlight Reset Lamp Timer and press OK. A
warning message is displayed asking if you want to reset the lamp timer. Highlight Reset and press
OK. The lamp time will be reset to "0".
Do not reset if the lamp is not new or replaced as this could cause damage.
42 Maintenance