Important Safety Instructions - PMC IB1S-AIII User Manual

Important Safety Instructions

Read these instructions and keep them in a safe place for future reference.
Heed all electrical safety warnings, including any on the loudspeaker itself.
Do not use the loudspeaker near water.
Do not install the loudspeaker near heat sources such as radiators, ovens or other very hot
equipment, or in unventilated soffits or enclosures.
Do not attempt to service the equipment. There are no user-serviceable parts inside.
Please refer all servicing to PMC authorised personnel.
Servicing is required when the apparatus is damaged, exposed to moisture, or exhibits
a distinct or sudden change of operation or audio performance.
Unplug this product from both signal source and power during electrical storms, or when
unused for extended periods of time.
Packaging material can pose danger to the young and vulnerable. Ensure these items
are stored or disposed of safely.
III
The IB1S-A
activated monitor can produce high sound pressure levels. Exposure to high
levels of sound has the potential to cause hearing damage. Use care when adjusting the
system volume to ensure sound pressure levels remain within safe and comfortable limits.
Very powerful magnets are employed in the IB1S-A
have a detrimental effect on magnetically-sensitive items if placed too close, such as CRT
(tube-style) televisions or monitors, and media such as cassettes and videotapes.
The loudspeaker cabinet should only be cleaned with a dry, lint-free, cloth. Do not use
solvents, abrasives, waxes or liquids as they may be detrimental to the finish.
To avoid damage to flooring when using the IB1S-A
determine the suitability of either spikes or protective glides.
PMC has made efforts to provide accurate installation information and good quality
fixings. However, PMC will not be held responsible or liable for injuries or property damage
(direct, indirect or consequential) arising out of use or inability to use this product safely
and properly.
The power switch is located on the rear of the speaker. The mains cord is used as a mains
disconnect device and should remain accessible at all times.
Only use at altitudes not exceeding 200m – Only use in non-tropical climate regions.
III
activated monitor which may
III
studio stands the user should