5. Installation instructions
5.1 Mechanical installation
All versions of the GhosT-OLED series are based on the same housing system which makes them
easy and fast to setup. Before you start installing the screen, follow the instructions provided in 3
Scope of delivery and 4 Pack-/ and unpack-instructions.
Note: Read the following instructions carefully to prevent injuries to humans or damages to the
system.
Note: For mounting the GhosT-OLED at least three persons are required.
Note: Use only the required tools and mounting materials.
5.1.1 Installations tools and materials
Quantity
Description
1
5mm HEX key
•
up to 14
M6 x 16 mm + surface thickness
•
Note: The screw size always needs to be
16 mm longer than the surface thickness of
the exhibition furniture.
Note: The head shape of the screw
depends on the conditions of the mounting
area.
Note: The number of available screw holes
depends on the given version and
installation option.
Note: Min. 8 screw holes have to be used
up to 14
6,4 mm washers
•
Note: The use of safety washers is
recommended in most cases. This depends on
the material of the mounting area
14
Illustration