Table of Contents
Advertisement
4. Pack-/ and unpack-instructions
GhosT-OLED units get shipped in a functional flight case designed for all three installation versions.
Caused by the universality the units get inserted upside down.
Note: Read the following instructions carefully to prevent injuries to humans or damages to the
system and environment.
Note: GhosT-OLEDs provided as straight-/ or straight-offset version have to be mounted right after
unpacking. There is no possibility to place them on a table or on the floor intermediately.
Note: For packing and unpacking a unit at least two persons are required.
4.1 Table-Stand Version
Description
1. Make sure that the brakes of the flight
case are tightened
2. Open the front cover of the flight case
3. Open the top cover of the flight case
1. Lift the unit out of the flight case
carefully by considering the guiding slot
on the bottom side of the flight case
2. Rotate the unit by 180° degrees and set
it down carefully
3. Attach the display to the exhibition
furniture referring to 5 Installation
instruction
10
Illustration
3
1
2
3
2
1
Guiding-
Slot
Advertisement
Table of Contents
