Table of Contents
Advertisement
3
When you reach the Camera/Channel Settings screen, you will want
to have installed the cameras in their final position. Please make
sure you have mounted cameras at least 7ft. above the ground and
angled them slightly down.
At this stage of the Startup Wizard, you will be instructed on adjusting
the camera sensitivity and setting the Motion Detection Area. Having
your cameras in their final position will be key.
So, if you would like to detect motion for the front door to your home,
place the camera to the side of the entrance.
4
This is the last screen you will
see when you have successfully
completed the Startup Wizard.
TIP:
For additional configuration of your DVR, please refer to the owner's
manual located on our support page at www.NightOwlSP.com.
TIP:
The infrared sensor
works best for "side to
side" movement across
the cameras field of view
as opposed to movement
directly to or away from
the camera.
6
Hide quick links:
Advertisement
Table of Contents
