Advertisement
INSTALLATION HARDWARE
The Fathom IWS-108 enclosure package includes all parts and hardware
necessary for the installation of one (1) enclosure. Since a portion of the
enclosure will be inaccessible after installation, we strongly recommend
reading these instructions completely before beginning the installation
process. Please note, these instructions are for the installation of one (1)
enclosure. Simply repeat the steps to install additional enclosures.
TOOLS FOR INSTALLATION
Below is a list of recommended tools to perform the installation of the Fathom
IWS-108 enclosure. Depending on the specifics of your installation, you may
need additional tools, hardware and/or accessories.
• Safety glasses
• Cordless drill/driver with #2 Phillips bit
• Wire strippers
• Wire cutters
• Pencil or Marker
Page 8
• Tape measure (100-inch minimum)
• Drill bits
• Utility knife or scissors
• Right angle driver (optional)
• Drop cloth (optional)
• Masking tape (optional)
| Fathom IWS
Hide quick links:
Advertisement
