Advertisement
Spacers and
padding will vary to
ensure a proper fit.
| Fathom IWS
THE ENCLOSURE
The Fathom IWS enclosure utilizes extensive architectural features aimed at
improving rigidity while keeping a very low profile and minimal wall thickness.
A unique port design vents through a slot located at the perimeter of the driver
mount to enhance efficiency and low-bass output. Designed to fit snugly within
a 2 x 4 stud wall cavity, the enclosure has various spacers and padding applied
to specific areas, allowing it to only make gentle contact with its surrounding
wallboard surfaces. The placement and amount of pressure applied by these
pads is a critical design aspect to ensure proper fit and should not be altered
in any way. Failure to use the proper enclosure and/or alteration of the spacers
and padding will result in loss of performance and unwanted wall vibrations.
61.26-inches x 14-inches x 3.25-inches
(1,565 mm x 355 mm x 83 mm)
*Dimensions listed are approximate and do not include various spacers and padding.
Enclosure Dimensions*
Page 5
Hide quick links:
Advertisement
