NETGEAR WN3000RPv3 Installation Manual page 9

10. If the screen is still displayed on your computer or device, select the
following check box and click the Continue button.
A message displays conirming that the extender has connected to the
WiFi network.
11. Click the Finish button.
12. Unplug the extender and move it to a new location closer to the area
with a poor WiFi signal.
The location that you choose must be within the range of your
existing WiFi router network.
13. Plug the extender into an electrical outlet.
The Power LED
press the Power button.
14. Use the Router Link LED
extender-to-router connection is optimal.
lights green. If the Power LED does not light,
to help you choose a spot where the
9