Figure 40: Management – Snmp Setting - Comba Telecom mBDA-200S User Manual

Note: For remote monitoring, the IP Address must be set correctly according to the location IP of remote
connection. If more than one equipment is connected to the public network through the same router, the
router's local IP CANNOT be set as 192.168.8.*.

SNMP Setting

Security
Click , [Modify Password] window will pop-up.
ENU STATUS : 1-0-0
USER MANUAL FOR MBDA-200S
Figure 40: Management – SNMP Setting
Figure 41: Management – Security
Copyright - refer to title page Page 39