Weather Band - Mercedes-Benz COMAND Operator's Manual

i
Manual tuning is also possible in all
wavebands by pressing  or .
The frequency will change by the tuning
increments for the respective wave-
band each time one of the buttons is
pressed.
Frequency increments for manual
tuning:
FM 0.2 MHz
AM 10 kHz
Tuning via direct frequency input
Entry example:
98.5 MHz in FM waveband
Switch to the FM waveband
( page 35).
Press 2.
The frequency input display appears.
The frequency range of the FM wave-
band is shown.
Press the number buttons in
succession: !, , and .
Each number entered appears in the
display.
The system tunes to the frequency en-
tered (in this example: 98.5 Mhz).
The FM menu appears with a brief de-
lay.
Radio operation
i
Entries outside the frequency range are
not possible.
Within the AM waveband, the input is
restricted to frequencies within the re-
spective frequency increment, which
is10 kHz.
The system will select the nearest valid
frequency if a frequency outside the
frequency increment is entered.
Tuning to a station on Weather Band
Tuning via station search
Seven channels are available on the

Weather Band.

Tuning using COMAND control unit
Switch to the WB waveband by press-
ing the WB soft key in the Radio main
menu ( page 35).
Audio
39