Information - Mercedes-Benz COMAND Operator's Manual

Service
Tele Aid*
Terminating the connection
On the COMAND control unit:
Press /.
On the multifunction steering wheel:
Press t .
COMAND reverts to the system last ac-
tive before Tele Aid* was activated.

Information

A call to the Mercedes-Benz Response
Center will be initiated. Information re-
garding the operation of your vehicle, the
nearest authorized Mercedes-Benz Center
or Mercedes-Benz USA products and ser-
vices is available to you. Refer to your vehi-
cle Operator's Manual for additional
information.
146
When a call to the Mercedes-Benz Re-
sponse Center is initiated, Connecting ap-
pears on the display.
When the connection is made, the mes-
sage Call Connected appears on the dis-
play.
Even after the connection has been termi-
nated, the service will remain active for 5
minutes in order to transmit any required
data. During this time, phone calls can not
be made, nor can SMS messages be re-
ceived.
The transmitted data can contain, e.g., text
messages or address details of a Mer-
cedes-Benz Center.
Text messages
Press  after you have read the mes-
sage.
The message disappears.
Route guidance
You are prompted to confirm if route guid-
ance to the address is to be started.
Use  to select the Yes menu item
and confirm with .
The system starts the route calcula-
tion, and subsequently the route guid-
ance to the defined address
( page 116).