Harvest Right Home Freeze Dryer Owner's Manual page 41

Previous Job Not Completed
• This screen appears if the freeze
dryer loses power during a
batch. This can happen from a
power outage, the machine being
unplugged, turning the switch off
on the machine.
• Pressing "Cancel" will return you
to the home screen.
• Pressing "Proceed" will return the
freeze dryer to the point where
the process was interrupted.
Error in Drying, Unable to Achieve
Vacuum
• This screen will appear when the
freeze dryer isn't able to achieve
proper vacuum in a set amount of
time or it lost the vacuum pressure.
• There are fail safes to protect the
vacuum pump:
• Get under 2500mT within 15
minutes.
• Then pull under 1000mT within
30 minutes.
• If the freeze dryer fails to achieve
these pressures, this screen
appears and prompts you to
find the vacuum leak. Once the
vacuum leak has been found and
sealed, press "Continue" to return
to the point where the process
was interrupted.

41