Harvest Right Home Freeze Dryer Owner's Manual page 39

Table of Contents

Advertisement

CURRENT JOB TEMPerature SETTINGS
From the "Current Job
Temperature Settings" screen you
can adjust the hottest temperature
the heaters can go. Most users will
NOT HAVE A NEED to adjust this
temperature. 125 degrees is the
preset temperature.
To permanently change the
settings, push the upper right-
hand corner of this screen.
To save any changes, press "Done".
current job Adjust Time
To increase or decrease the
freezing and drying times, press
"Current Job Adjust Time" in
the customize menu. (If these
times are adjusted, press "Start
Custom" to begin customized
batch. Pressing "Done" will return
it to the preset 9 hours freezing
and 7 hours drying.)
To permanently change the time
settings, press the upper right-hand
corner of this screen. To switch
to permanent settings adjustment
changes, press "Done".
Cable Disconnect Error
If this message appears on the
screen, a cable is disconnected.
Most likely, it is the mobile
connector attaching shelves to the
machine. Try disconnecting and
reconnecting this block. Depending
on your model, the picture shown
will be the same, but the connectors
may look different.
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents