Connecting with fast survey to lti trupulse 360b (4 pages)
Summary of Contents for Spectra FW V1.6
Page 1
PIXEL GPRS/SMS TRACKER DEVICE PIXEL PIXEL GPRS/SMS TRACKER DEVICE GPRS/SMS TRACKER DEVICE - - - - FW V FW V1.6 1.6 AND HIGHER AND HIGHER - - - - FW V FW V AND HIGHER AND HIGHER Issue date: September 2012 Version: 1.2...
Page 2
INTRODUCTION INTRODUCTION INTRODUCTION INTRODUCTION This manual illustrates the correct use of the PIXEL GPRS/SMS V.1.6 tracker device. Before starting, please insert a SIM card into the tracker device after first making the following checks on it: - The PIN request on the SIM must be disabled. - All call waiting, transfer and voicemail functions should be deleted.
Page 4
SETTING REMOTE NUMBERS SETTING REMOTE NUMBERS SETTING REMOTE NUMBERS SETTING REMOTE NUMBERS The following commands set the telephone numbers of the recipients, for which enabling the selected function is required (IT IS ADVISABLE TO ENTER THE INTERNATIONAL PREFIX BEFORE THE SELECTED NUMBER).
Page 5
SETTING GEOFENCING SETTING GEOFENCING AREA AREA SETTING SETTING GEOFENCING GEOFENCING AREA AREA The following commands set the telephone numbers of the recipients, on which you want to enable the geofencing areas alarmed. The management includes both the entry that the output of the vehicle by a preset specific area. You can program up to 5 local areas.
Page 6
TRACKING CELL- - - - ID SMS COMMANDS TRACKING CELL ID SMS COMMANDS TRACKING CELL TRACKING CELL ID SMS COMMANDS ID SMS COMMANDS This function will enble the continuos send of cell-id sms with specific delay. Spektra provide a specific localization software with an extension that read this information and, using a pubblic cell-id database, localize the pixel unit.
Page 7
PROGRAMMING GENERAL PARAMETERS PROGRAMMING GENERAL PARAMETERS PROGRAMMING GENERAL PARAMETERS PROGRAMMING GENERAL PARAMETERS ##NNAMExxxx* setting the unique name of the tracker device xxxx = vehicle name (maximum 10 characters) xxxx = VEICOLO1 - (DEFAULT) ##MOVx enable the shock sensor and set the motion sensivity x = 0->9 x = 0 function disable (DEFAULT) x = 1 low sensivity, a long and durable movment is necessary to trigger the...
PROGRAMMING PARAMETERS PROGRAMMING PARAMETERS FOR THE GPRS/ FOR THE GPRS/TCP SECTION TCP SECTION PROGRAMMING PARAMETERS PROGRAMMING PARAMETERS FOR THE GPRS/ FOR THE GPRS/ TCP SECTION TCP SECTION ##NAPNxxx* manual setting of a generic APN for internet access (after changing the APN, the tracker device must be restarted with the special ##RESET command, or else by switching it off then back on again) xxx = APN name (maximum 50 characters)
Page 9
DIAGNOSTICS OF THE TRACKER DEVICE DIAGNOST ICS OF THE TRACKER DEVICE DIAGNOST DIAGNOST ICS OF THE TRACKER DEVICE ICS OF THE TRACKER DEVICE These commands are sent to the tracker device to identify its status. The tracker device will reply with SMS messages containing the programmed settings and other operating parameters.
Page 11
GENERAL NOTES ON THE OPERATION GENERAL NOTES ON THE OPERATION GENERAL NOTES ON THE OPERATION GENERAL NOTES ON THE OPERATION The correctly programmed PIXEL GPRS/SMS tracker devices interact with our PIXEL PIXEL MULTIVEICOLO MULTIVEICOLO PIXEL PIXEL MULTIVEICOLO MULTIVEICOLO software installed on a PC. Note that the complete software package and updates can be found on our website: http://WWW.SPEKTRA http://WWW.SPEKTRA...
TECHNICAL FEATURES TECHNICAL FEATURES TECHNICAL FEATURES TECHNICAL FEATURES GSM SECTION: GSM SECTION: GSM SECTION: GSM SECTION: GSM FREQUENCIES: Quad–Band GSM 850/900/1800/1900 MHz. RF POWER: 2 W Class 4 (900 MHz) – 1W Class 1 (1800 MHz). COMMUNICATION PROTOCOL: Proprietary compressed on GPRS (TCP and E-MAIL) a/o SMS. SIM: GSM providers with DATA channel enabling, SIM slide positioning inside the case.
Need help?
Do you have a question about the FW V1.6 and is the answer not in the manual?
Questions and answers