Off Timer - Philips 75BDL3010T User Manual

• {Correction time} - The options are: {0.5 / 1.0 / 1.5 / 2.0}
• {Daylight saving correction} Select {On} to enable this function.

Off Timer

Set the display to turn itself off to standby mode within an amount of
time specified.
The options are: {Off, 1 ~ 24} hours from current time.
NOTE: W hen the "Off timer" is activated, the "Schedule" settings will
be disabled.
Schedule
This function allows you to program up to 7 (seven) different scheduled
time intervals for the display to activate.
You can select:
• The time for the display to turn on and turn off.
• The days in a week for the display to activate.
• Which input source the display will use for each scheduled
activation period.
NOTE: W e recommend you to set up current date and time in the
{Date and time} menu before using this function.
1. Press [OK] or [ ] button to enter the submenu.
Schedule
Today 2014 . 11 . 04
1
2 On
:
＿ ＿
3
4
5
6 WED
7 SAT
2. Press [ ] or [ ] button to select a schedule item (item number 1 ~ 7),
and then press [OK] button to mark it the item number.
Schedule
Today 2014 . 11 . 04
1
1
2 On
:
＿ ＿
3
4
5
6 WED
7 SAT
3. Press [ ] or [ ] button to select the schedule:
P ower-on schedule: Press [ ] or [ ] button to set the hour
1
and minute for the display to turn on.
Power-off schedule: Press [ ] or [ ] button to set the hour
2
and minute for the display to turn off.
Select or leave an empty "__" for both the hour and minute slot if
you do not want to use this power-on or power-off schedule.
Input-source selection: Press [ ] or [ ] button to select an
3
input source. If no input source is selected, the input source
will remain the same as last selected.
TUE 20 : 19 : 55
Input
Off
:
＿ ＿ ＿
MON TUE
THU FRI
SUN Every week
USB play list
TUE 20 : 19 : 55
2 3
Off Input
:
＿ ＿ ＿
4
MON TUE
THU FRI
SUN Every week
5
USB play list
Date schedule: Press [ ] button to select which day in a
4
week this schedule item will be take effect, and then press the
[OK] button.
When Input-source select to USB, enable to access USB play
5
list setting:
Photo
Options
- Press [ ] [ ] buttons to choose files.
- Press [ ] [ ] buttons to switch Playlist and File Manager.
- Press [OK] button to set or clear the playlist.
- To save the playlist, press [
Photo
Movie.avi
Photo1.jpg
Sort
Photo2.jpg
Media Type
Photo3.jpg
Recursive Parser
Save list
Options
4. For additional schedule settings, press [
above. A check mark in the box next to the number of the schedule
item indicates that the selected schedule is in effect.
NOTES:
• If the schedules overlap, the scheduled power-on time takes priority
over scheduled power-off time.
• If there are two schedule items programmed for the same time, the
highest numbered schedule takes priority. For example, if schedule
items #1 and #2 both set the display to power on at 7:00 AM and
off at 5:00 PM, then only schedule item # 1 will take effect.
• Each Playlist supports up to 30 files.
• Playlist will not be cleared after {Factory reset}. You have to
manually remove the files or delete usb_schedulinglist.txt in the
USB.
DDC/CI
Choose to turn on or off the DDC/CI communication function. Select
{On} for normal use.
DDC/CI (Command Interface) specifies a means for a computer to
send commands to the monitor, as well as receive sensor data from the
monitor, over the bidirectional link such as DDC2Ab/Bi/B+.
25
Photo
Video
] and choose Save list.
\media\photo
[..]
Photo
], then repeat the steps
75BDL3010T
0001/0002
Exit
0004/0004
Exit