Lenovo ThinkStation C30 Configuration Manuallines page 8

Set C30 Required system BIOS changes:
- During boot up press F1 at the LENOVO splash screen to invoke Set Up.
- Select the Advanced tab
- Select CPU Config <Enter>
- Select Hyper-Threading
- Verify setting is Enable

If Hyper-Threading is set for Disable then it must be changed to Enable
- Hi F10 to save the Hyper-Threading setting
- Select CPU Power Management configuration tab
- Select Intel Dynamic Power Technology <return>
- Default setting is Energy Efficient

Change this setting from Energy Efficient to Disable
- Hi F10 to save the Runtime Power Management settings
- Select Devices Tab
- Select North Bridge Tab
- Select NUMA
- Default setting is Enable

Change this setting from Enable to Disable
- Hi F10 to save the NUMA setting
- Press F10 twice to Save
- Save Changes and Exit
- System will Reboot
Set C30 Optional system BIOS setting:
- Select the Power tab
- Select Hardware Power Management <Enter>
- Select Intel Turbo Mode
- Default setting is Enable

Change this setting from Enable to Disable
- Press F10 twice to Save
- Save Changes and Exit
**
Only required if connecting USB audio I/O devices.
Page 8 of 20
– Avid Technology – 10 December 2013
David Pimm
Rev - D