Easy CDV43 User Manual page 6

8. Light Function
When the monitor is in standby mode, press
Use / Button to move upward / downward to select 'Light' option , press
Button to enter the 'Light' Option page, there are 3 options.
Main Menu
Light
Setup
Restore
About
button to selete Light
Use /
item, then press
to confirm.
1. Turn On : Select it to open the staircase light, the light will be turned off
automatically after 60 seconds.
2. Turn On 5min : Select it to open the staircase light, the light will be turned off automatically
after 5min.
3. Turn Off : Select it to close the staircase light.
Note: the light function will be activated only when the system is connect ed to a light via
CDV -RLC module, otherwise, this function is disabled . For more information, please refer to
CDV -RLC user manual .
9. Setup Function
When the monitor is in standby mode, press
Use / b utton to move upward / downward to select Setup option , press
to enter the User Setup page, there are 4 options.
Main Menu
Light
Setup
Restore
About
Use / button to select
Setup
item , then press
button to confirm.
1. Ring Tone: Select it to set the ring tune of Door Station, Intercom and Door Bell.
2. Ring Volume: Select it to set the volume of monitor.
3. Monitor Time: Select it to set monitor time.
4. Language Select: Select it to set the language.
(Requires CDV-RLC)
Menu button
Menu
Menu Button to enter main menu page.
Light Option
Turn On
Turn On 5min.
Turn Off
Use / Button to selete the item
you want, then press
to confirm.
Menu b utton to enter main menu page.
User Setup
Ring Tune
Ring Volume
Monitor Time
Language Select
Use / Button to select the
option you want, then press
button to confirm.
5
Menu
Menu button
Menu b utton
Menu