Clock Functions - Electrolux EOD5720AAX User Manual

12 www.electrolux.com
The Fast heat up decreases the heat up
time.
To turn on the Fast heat up press and
hold for more than 3 seconds.

7. CLOCK FUNCTIONS

7.1 Clock functions table
Clock function
00:00
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12" flashes.
1. Touch
2. Touch
3. Touch
4. Touch
The display shows the new time.
To change the time of day touch
again and again until
7.3 Setting the DURATION
1. Set an oven function and
temperature.
2. Touch
starts to flash.
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MINDER
COUNT UP TIMER To set the count up, which shows how long the appli‐
and 12:00.
or to set the hours.
.
or to set the minutes.
or .
starts to flash.
again and again until
If the Fast heat up is turned on the
display shows: flashing horizontal bars
.
Application
To show or change the time of day. You can change
the time of day only when the appliance is on.
To set how long the appliance operates.
To set when the appliance deactivates.
To combine DURATION and END function.
To set a countdown time. This function has no effect
on the operation of the oven. You can set the MI‐
NUTE MINDER at any time and also when the appli‐
ance is off.
ance operates. This function has no effect on the op‐
eration of the appliance. It is on immediately when
the oven starts to heat. The COUNT UP TIMER is
not activated if DURATION and END are set.
3. Use
DURATION time.
4. Touch
starts automatically after 5 seconds.
5. Use
DURATION time.
6. Touch
starts automatically after 5 seconds.
When the set time ends, an acoustic
signal sounds for 2 minutes.
time setting flash in the display. The
appliance deactivates.
7. Touch a sensor field to stop the
acoustic signal.
8. Turn off the appliance.
7.4 Setting the END
1. Set an oven function and
temperature.
or to set the minutes for
or the DURATION time
or to set the hours for
. The DURATION time
and