Using Kasa With Smart Switches; Kasa Account; Kasa Settings - TP-Link HS200 User Manual

User's Manual

Using Kasa with Smart Switches

Kasa Account

While you don't have to have a Kasa account to use TP-Link Smart Home
devices, signing up for an account provides added functionality such as:
• Synchronization of settings and configurations to all your mobile devices.
• Ability to control and configure the devices from outside your home.
• Use of third-party services and products such as Amazon Echo.
Devices can only be associated with one Kasa account. To remove the
association, turn off Remote Control in the Kasa's settings, or factory reset the
device.
After creating your Kasa account, you will need to verify the email associated
with your account by clicking a link in an email that Kasa sends you. Until you
verify the email, much of the above functionality will not work.

Kasa Settings

Kasa Settings allows you to set your global preferences such as:
• Remote Control to control your Smart Home devices outside of your home.
You need to sign in to your Kasa account first to turn on this function.
• Location and Time to set the location and time of where the Smart Home
devices are located so that the Away Mode and Schedules can run on time.
You can set your home's location using your smart device's GPS function, or
manually enter the latitude and longitude coordinates.
• Firmware Update to update your Smart Home devices when there is an
update available. Refer to
www.tp-link.com
Firmware Update
Smart Wi-Fi Light Switch
for instructions.
7