If the mains flex of this appliance becomes damaged, it must be repaired only by the KRUPS customer service department or by a similarly qualified individual, in order to avoid any danger to the person.
located directly above the opening in the Before use filter cover. Then press the sealing lever right down (6). Before preparing coffee in the machine for the very first time it is advisable to operate Switch on the appliance (7). the machine 2 or 3 times with clear water, If the appliance should be accidentally used without coffee grounds.
Page 7
KRUPS dealer. The outlet nozzle seal is best removed from its seating with the aid of a suitable tool (e.g. screwdriver). Make sure that the new outlet nozzle seal is pressed firmly in place (11).