Table of Contents
Advertisement
Caring for your Integrated Larder Fridge
Cleaning your Integrated Larder Fridge
It is a good idea to clean the inside of your
Larder Fridge regularly. Always switch off
at the socket outlet and pull out the
mains plug first.
Remove any food.Wipe out the inside of
the Larder Fridge using a clean cloth wrung
out in either a solution of one teaspoon of
bicarbonate of soda to one pint of water, or
Milton diluted according to the
manufacturer's instructions.
The complete interior including the door,
and removable parts, should be washed
with care ensuring that the cloth does not
become caught on any part of the
appliance. Never use any household
cleaner or detergent, abrasive powders or
wax polish. These not only damage the
surfaces, but also leave a smell in the
Larder Fridge.Make sure that no particles
of food are left in the interior gutter.
If the drain hole becomes blocked it may be
cleared by pushing the end of a pipe
cleaner or drinking straw through the drain
hole and gently moving it up and down.
The rubber door seal must be cleaned
with soap and water only as a detergent
will damage it.
Automatic defrosting
The refrigerator requires no defrosting,
since the ice at the rear wall melts
automatically when the compressor is off
and water slides downwards through the
hole in the rear wall.
This is collected in a receptacle placed at
the bottom of the appliance.
Going Away
If you expect to be away for any length of
time and don't want to use your Larder
Fridge, switch off at the power point and
pull out the plug. Remove all food and wipe
out the interior. Always leave the door ajar
to prevent the accumulation of odours.
How to Replace the Interior Light
Should the light fail to work, switch off at
the power point and pull out the plug.
Remove the shelves to make access
easier. Access to the bulb is from the rear
of the cover(arrow 1) and remove the
cover in the direction of (arrow 2).
Unscrew the old bulb. Screw the new bulb
securely into the holder.
Replace the plug in the power point and
switch on. If the light fails to work, do not
worry, it will not affect the working of your
Larder Fridge.
Obtain a replacement (max 15 watt 220-
240V alternating current, E14 lampholder)
from your nearest Spares Centre and
replace the old bulb.
Please contact our Customer Care Centre
for a replacement on:
0870 444 9939.
13
Hide quick links:
Advertisement
Table of Contents
