Table of Contents
Advertisement
Getting your Integrated Larder Fridge
Ready for Use
Before using your Integrated Larder Fridge for
the first time the interior, including the door and
all removable parts should be wiped out. Use a
damp cloth wrung out in either a solution of
one teaspoon of bicarbonate of soda to one
pint of water, or Milton sterilising fluid diluted
according to the manufacturer's instructions.
WARNING: NEVER USE ANY HOUSEHOLD
CLEANER OR DETERGENT, ABRASIVE
POWDERS OR WAX POLISH.THESE NOT
ONLY DAMAGE THE SURFACES,THEY
ALSO LEAVE A SMELL IN THE LARDER
FRIDGE.
Final Check
Before you start using the Larder Fridge, check
that:
1. It is thoroughly dry inside
2. Air can circulate freely
3. The feet have been adjusted, ie the feet are
firmly on the ground and ensure the appliance
is level.
Starting
Insert the plug into the wall socket and switch
on the electricity supply. Open your Larder
Fridge door and the light will come on. There is
a control dial on the right hand side of Larder
Fridge interior. Turning the temperature
selector dial from '0' (off ) towards '7' to the
medium setting '4'. You will hear a noise as the
compressor starts up.
10
Running in the Compressor
Your Larder Fridge is operated by a
compressor which switches on and off in order
to maintain the Larder Fridge's temperature.
The compressor is a precision piece of
machinery like a car engine and requires a a
running in period of up to two months. During
this time the compressor has to work a little
harder and this may result in more noise than
usual.
Temperature selection
* Higher settings on the knob (towards 7)
mean lower temperatures. temperature
in the interior of the appliance may even
drop below 0°C.
When the ambient temperature is
normal, we recommend the medium
setting (4).
* The temperature in the refrigerator is
affected by how often the door is opened
and the amount of fresh food recently
stored.
* In the (off) position, the appliance does
not operate (the cooling system is
switched off). The power supply to the
interior light will not be affected and the
light will operate when the door is
opened.
Tips for energy saving
* Try not to open the door to often.
* Check that air is circulating properly through
the plinth grille. (e.g. the grille is not blocked or
covered).
Hide quick links:
Advertisement
Table of Contents
