Frost free refrigerator - freezer side by side (14 pages)
Summary of Contents for New World NW801LA
Page 1
Installation and User Instructions NW801LA Integrated Larder Built In Retention of the Instruction Book This Instruction Book must be kept handy for reference as it contains important details on the safe and proper use of the appliance. If you sell or pass the appliance to someone else, or move house and leave it behind, make sure this Book is also provided so the new owner can become familiar with the appliance and safety warnings.
Your New Integrated Appliance Using your new integrated appliance is very simple. Nevertheless, to get the best results it is important that you read right through this handbook before using your integrated appliance for the first time. Electrical Requirements WARNING: This appliance must be earthed. Fuses Your appliance comes fitted with a plug and a 13A fuse.
Contents Page Electrical Requirements Disposal Notes/Technical Safety Installation Model NW801LA Get to know your Integrated Larder Fridge Getting your Integrated Larder Fridge ready for use Controlling the Temperature Storing Food Do’s & Don’ts Caring for your Integrated Larder Fridge 12-13 If your Integrated Larder Fridge Won’t Work...
INTRODUCTION Your New World Integrated Larder Fridge Thank you for purchasing a New World Larder Fridge. Its stylish and practical design will enhance your kitchen. Getting Help If you have any problems with installation, operating or cooking with your New World fridge please check through these instructions thoroughly to make sure that you have not missed anything.
Installing Your Integrated Appliance Please read through this section before Although you will need to provide all tools starting any work. required for the installation, all fittings are supplied with the appliance. The installation location should be in a dry, well ventilated room.
Page 6
Installing Your Integrated Appliance Before fitting The electrical socket should be easily accessible. Do not connect the appliance to the electricity supply until installation is completed. Make sure that the appliance is sitting level on the floor by adjusting all four feet.
Changing over the door hinges Before fitting, if needed, change over the way the door opens as show below.
Page 8
Fastening the appliance under the Fitting the door panel to the appliance. worktop. Secure the appliance bracket under the worktop by two fixing screws. Adjusting the base. Cut out the plinth of the cabinet to match the aplliance bottom ventilation grille. Mounting the kitchen cabinet door.
Get to know your Integrated Larder Fridge Model NW801LA NW801LA FEATURES: 1 Shelf 2 Defrost water outlet 3 Crisp tray and serving tray WARNING: CHILDREN SHOULD NOT BE ALLOWED TO PLAY WITH THE APPLIANCE OR TAMPER WITH THE CONTROLS. 1. Shelf 3.
Getting your Integrated Larder Fridge Ready for Use Before using your Integrated Larder Fridge for Running in the Compressor the first time the interior, including the door and Your Larder Fridge is operated by a all removable parts should be wiped out. Use a compressor which switches on and off in order damp cloth wrung out in either a solution of to maintain the Larder Fridge’s temperature.
Storing Food You can store most fresh foods in your Integrated Larder Fridge. Recommended maximum storage times are given in the table below. Days Raw fresh meat joints,steaks, chops offal (liver, kidney etc) minced meat, sausages Cooked meat including made up dishes and left overs Poultry fresh whole (store giblets separately) cooked...
Do’s and Don’ts DON’T Do:- Take off any unsuitable leaves on Don’t:- Store bananas in your Larder vegetables and wipe off any soil. fridge. Do:- Leave lettuce, cabbage, parsley and Don’t:- Store melon in your Larder Fridge. cauliflower on the stem. It can be chilled for short periods Do:- Wrap cheese firstly in greaseproof...
Caring for your Integrated Larder Fridge Cleaning your Integrated Larder Fridge How to Replace the Interior Light It is a good idea to clean the inside of your Should the light fail to work, switch off at Larder Fridge regularly. Always switch off the power point and pull out the plug.
Page 14
Caring for your Integrated Larder Fridge Cleaning the condenser * Unscrew the screws from the condenser Make sure the appliance is cover and remove the cover. disconnected from the power supply. * Clean the dust and dirt from the Dust from the condenser should be condenser.
(NB Water droplets on the cooling plate or back wall are normal). If, after following all these instructions, you are still having problems, contact your nearest New World Service Agent...
Model Number..........Serial Number ..........Date of Purchase ........In order to provide a complete service history for your New World product, please ask the service engineer to record the appropriate details in the chart below. Date Nature of fault...