Parts Description - Makita DVC864L Instruction Manual

State of abnormality
The cleaner runs while the tool's
switch trigger is not pulled.
Cannot erase all tool registrations in
the cleaner.

PARTS DESCRIPTION

► 1. Tank cover 2. Powder filter (HEPA) 3. Damper
4. Prefilter 5. Tank
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
CAUTION:
Always wear dust mask during
assembly or maintenance.
Probable cause (malfunction)
Other users are using the wireless acti-
vation of the cleaner with their tools.
Pressing the wireless button on the tool. Press the wireless button on the cleaner for erasing
The stand-by switch on the cleaner is
not set to "AUTO".
The wireless activation button is not
hold down correctly.
1
2
3
4
5
13 ENGLISH
Remedy
Turn off the wireless activation button of the other
tools or cancel the tool registration of the other tools.
all tool registrations.
Set the stand-by switch on the cleaner to "AUTO".
Hold down the wireless activation button for more
than 6 seconds and then release it when the wire-
less activation lamp blinks in red. Hold down the
wireless activation button for more than 6 seconds
again until the wireless activation button rapidly
blinks in red and then release the button.
Installing the powder filter (HEPA)
and prefilter (for dry dust)
CAUTION:
Never pick up water or other liq-
uids or wet dusts when using the powder filter.
Picking up such things may cause the powder filter
breakage.
To use powder filter:
Place the prefilter in the tank with aligning the
1.
mounting position markings.
Mount the damper on the powder filter and then
2.
place them in the prefilter with aligning the mounting
position markings.
3. Finally, mount the tank cover and lock it.
6
6
6
► 1. Tank cover 2. Powder filter (HEPA) 3. Damper
4. Prefilter 5. Tank 6. Mounting position marking
Before using the powder filter, make
NOTICE:
sure that prefilter and damper are always used
together. It is not allowed to install powder filter
solely.
1
2
3
4
5