Contents Safety Precautions Introduction Components Control Panel Accessories Dear customer, thank you for purchasing Installation our product. Please read these instructions Operations carefully before using our product. And save this manual for future use. Dismounting and Cleaning Care and Maintenance Specifications Circuit Diagram Troubleshooting...
Page 3
Safety Precautions Safety Precautions The belowed precautions are divided into “WARNING” and “CAUTION”, each precaution involves to related safety important content, please be sure to follow. CAUTION Remark: Said that if operation mistakes, WARNING Serious injury means blindness, injury, burns it may cause serious injury.
Introduction Control Panel This product uses the microcomputer control technology, it has features of quick making noodles, few flour residues, Timer Control and Display low noise and easy cleaning. This product has function of kneading dough and making noodles, it can make your life more perfect and wonderful. The performances of this product meet national standard Fuctional Control and Display requirements, please be assured to use.
Installation Installation Make sure the power is disconnected before installation. Make sure the power is disconnected before installation. Press Button Place the Main Part on a stable and Insert the Kneading Blade and Slat level surface. Plug in the Extrusion into the Kneading Chamber, Box and rotate left 45 degree until close the top cover.
Operations Operations Ingredients: Bread flour (high-gluten flour) , water, edible oil, salt Ingredients: Bread flour(high-gluten flour), water, edible oil, salt Adding Flour Extrusion Place the machine on a stable and level 5.After Kneading dough, if the flour becomes a dough, press “Extrusion” button and take out the surface, make sure the machine has salt.
Make sure the power is disconnected before dismounting. Take out the Model No. PCA-6 parts one by one. To take out the extrusion box, press the unlock button while rotating the extrusion box. Clean the main part with a slightly damp...
Page 8
1 2 5 4 2 4 , г . Мо с к в а , В о л о к о л а м с к о е шо с с е , д . 8 8 , с т р . 8 Т...