Related Manuals for axing RFQ-845
Summary of Contents for axing RFQ-845
- Page 1 RFQ-845 | RFQ-845CI RFO-845 | RFO-845CI 8PSK/QPSK/Multituner | DVB-T Quattro/Octo modules Operation instructions...
-
Page 2: Table Of Contents
Operation instructions | Serie RFQ-845 and Serie RFO-845 Table of contents Product description..........................5 1.1. General............................5 1.1.1. Modules for DVB-S/S2......................5 1.1.2. Modules with multituner for DVB-S/S2, DVB-T/T2 oder DVB-C........5 1.2. Scope of delivery...........................5 1.3. Inputs/tuners...........................6 1.4. Output/modulators.........................7 1.5. Graphical user interface.........................7 1.6. - Page 3 3.6.6. Save Initialization Data......................28 3.6.7. Upload Initialization Data....................28 3.6.8. Device name.........................29 Use of CA modules..........................30 4.1. Insertion of CA modules......................30 4.2. CI menu for RFQ-845CI and RFO-845CI...................31 4.2.1. Using CI menu........................31 4.3. Decryption of programmes......................32 Technical data............................33 5.1. Input multituner..........................33 5.2.
- Page 4 Operation instructions | Serie RFQ-845 and Serie RFO-845 Safety instructions: The installation of the device and repair work on the device must be carried out only by a professional in accordance with the applicable VDE directives. In case of incorrect installation, no liability is assumed.
-
Page 5: Product Description
RFO-845 | SKT 80-00M Transmodulates DVB-S/S2, DVB-T/T2 or DVB-C into COFDM. The RFQ-845 ist built in two units, each with four full-fledged tuner inputs, four modulators and one output. RFO-845CI | SKT 80-02M Like RFO-845, decoding of encoded programs possible by using two CA modules. -
Page 6: Inputs/Tuners
Operation instructions | Serie RFQ-845 and Serie RFO-845 1.3. Inputs/tuners The quattro module includes four independent tuners and the octo module includes eight of them. Headend modules with 8PSK/QPSK tuners can receive DVB-S/S2. Headend modules with multituner can receive DVB-S/S2, DVB-T/T2 or DVB-C. For receiving DVB-T/T2 or DVB-C the LNB power supply has to been switched off (see 3.3 on page 17) before connecting a antenna... -
Page 7: Output/Modulators
1.4. Output/modulators The output channels of the modulators are allways neighbour channels The quattro module has four output modulators and one RF output. The first modulator can be set to any output channel between S2 and CH 69. The other three modulators are automatically set by incrementing the output channels in accordance with the chosen channel spacing. -
Page 8: Display Elements And Connectors
1.6. Display elements and connectors 1.6.1.RFQ-845 | SKT 40-00M and RFQ-845CI | SKT 40-04M 1. 4 × MPEG data stream modulator LED indicators (each with two LEDs) Error (red) = Modulator stream too large (fill level >95%, see 3.2.2 on page 16) OK (green) = Fill level O.K. -
Page 9: Rfo-845
1.6.2.RFO-845 | RFO-845CI | SKT 80-0x | SKT 80-0xM 1. 8 × MPEG data stream modulator LED indicators (each with two LEDs) Error (red) = Modulator stream too large (fill level >95%, see 3.2.2 on page 16) OK (green) = Fill level O.K. 8 ×... -
Page 10: Mounting And Installation
With the DC patch cable (SKZ 40-00) included in the scope of delivery, the modules can be connected together. While looping the modules through, a maximum of 3 x RFO-845(CI) or 4 x RFQ-845(CI) can be connected together. - Page 11 Installation in the headend base unit RFT-808: The power supply unit RFP-808 integrated in the headend base unit RFB-808 has a short and a long DC connecting cable on the output side. Connect the short DC connecting cable to the first module Connect the long DC connecting cable to the fourth module.
-
Page 12: External Operation
Operation instructions | Serie RFQ-845 and Serie RFO-845 2.1.3. Power supply in the headend base unit The power supply units supply the modules with 16 V DC voltage. The current consumption of all connected modules must not exceed the maximal delivery of the power supply unit used. -
Page 13: Connection To Dvb-S
2.2.1. Power supply by external operation When being operated externally, the module is directly connected to the DC power cable of the separate power supply unit (e.g. RFP-803). Every module has a DC loop output to supply another module with power. A SKZ 40-00 DC connection cable is included in the scope of delivery of each RFQ/O-845 module. -
Page 14: Configuration
Operation instructions | Serie RFQ-845 and Serie RFO-845 3. Configuration The device is configured via the graphical user interface of the integrated web interface. To access the user interface, you need a standard PC/laptop with a network interface and the actual version of the installed web browser. - Page 15 Enter the default password: Ramsen8262 Click the button ENTER PASSWORD If you are not automatically forwarded to the start page, click then the button OPEN PAGE In the header, the user can choose the language of the user interface. The possibilities are German (DE) and English (EN).
-
Page 16: Front Page
Operation instructions | Serie RFQ-845 and Serie RFO-845 3.2. Front page The relevant information required for the function of the system are shown on the front page. The decisive thing is the quality of the input signals and the utilization of the modulators. -
Page 17: Initialization
3.2.4. Initialization The initialization is subdivided in 3 configuration phases. Phase 1: Tuners. LNB settings, DiSEqC settings, Transponder frequency and transponder search run. Phase 2: Chosse of programmes, programme arrangement. Multiplexing after programme filtering (Remux mode) Transponder crossing multiplexing of FTA programmes (Cross-Multiplex mode) ... -
Page 18: Dvb-C, Dvb-T Or Dvb-T2 (For Multi Tuner Modules)
Operation instructions | Serie RFQ-845 and Serie RFO-845 3.3.2. DVB-C, DVB-T or DVB-T2 (for multi tuner modules) Select any tuner by the help of the buttons Tuner 1…4 Before connecting an antenna cable to an according tuner, the LNB Power has to be set to off Enter the center frequency... -
Page 19: Found Programmes
3.3.4. Found programmes After a successful station scanning, the radio and TV stations are shown in the area "FOUND PROGRAMS". The table contains information about programme type and encoding. 3.4. Initialization phase 2 In the initialization phase 2, the found programmes are subdivided by tuner. The programme name, the programme type and information about the encryption are shown. -
Page 20: Scrambled Programmes
Operation instructions | Serie RFQ-845 and Serie RFO-845 A new click on a button allow the assignment to be canceled. The modulator buttons fades then again. 3.4.2. Scrambled programmes Scrambled programmes are indicated by the abbreviation CA in the column Encryption. They can be forwarded in encrypted form, or be decrypted in the RFQ-845CI or RFO-845CI module by means of an integrated CA module (see 4. - Page 21 Assigning programmes to the modulators In the cross multiplex mode, the tuners are no longer assigned to the modulators. Programs, which are assigned to modulator 1 Click the table Tuner 1 and in the table Tuner 3 on the buttons M1. The three programmes are assigned to modulator 1.
-
Page 22: Lcn (Logical Channel Numbering)
Operation instructions | Serie RFQ-845 and Serie RFO-845 3.4.4. LCN (Logical Channel Numbering) During the scan of TV stations, the stations are usually saved in the sequence of the channel lists in tuner 1-4. The LCN function enables channel allocation for the station scan of the TV devices. The TV device must support the LCN function. - Page 23 69. The other three modulators are automatically set by incrementing the output channels in accordance with the chosen channel spacing. For example: modulator 1 = Channel 21 modulators 2, 3 and 4 = Channels 22, 23 and 24 DVB-T modulation: The modulation can be set on QPSK, on QAM 16 or on QAM 64.
-
Page 24: Fill Level
Operation instructions | Serie RFQ-845 and Serie RFO-845 DVB-T transmission Using the 8 k mode is recommended for reflections with really long modes (2 k and 8 k): durations. Due to the long symbol duration, long guard intervals are possible. -
Page 25: Chosen Programmes
26.126 29.029 30.737 31.668 3.5.3. Chosen programmes The programme table Selected Programs shows the programmes that were activated in phase 2 and that have been selected in the Cross Multiplex. 2016-10-31 | Technical changes, design modifications, errors and misprints are subject to change without prior notice.25... -
Page 26: Maintenance
Operation instructions | Serie RFQ-845 and Serie RFO-845 3.6. Maintenance The menu entry Maintenance enables software updates, changing the IP address, changing the password, restarting the module and erasing service data. Important: If you stay on the maintenance page for more than 2.5 minutes, an automatic logout will occur and you will have to repeat the login procedure. -
Page 27: Changing The Password
3.6.3. Changing the password The default password should be changed right after commissioning the module. The default password can be changed in the menu Maintenance > Set New Password. The default password is: Ramsen8262. Any new password must be 8-10 characters (letters and/or digits) long. After changing the password, the module must be rebooted. -
Page 28: Save Initialization Data
Operation instructions | Serie RFQ-845 and Serie RFO-845 3.6.6. Save Initialization Data In the section SAVE SYSTEM INITILIZATION DATA TO FILE you can save the current initilization data from phase 1 to 3 into a file on your computer. Click ob SAVE. -
Page 29: Device Name
3.6.8. Device name In the section DEVICE NAME you can set a new device name for the module. Enter a name in the field SET NEW DEVICE NAME. Click on SAVE CHANGES. The new device name is shown at the login. 2016-10-31 | Technical changes, design modifications, errors and misprints are subject to change without prior notice.29... -
Page 30: Use Of Ca Modules
Operation instructions | Serie RFQ-845 and Serie RFO-845 4. Use of CA modules 4.1. Insertion of CA modules Up to four CA modules (CAM1…CAM4) can be inserted into the CI-slots at the front side of the RFQ-845CI. Up to two CA modules (CAM1…CAM2) can be inserted into the CI-slots at the front side of the RFO-845CI. -
Page 31: Ci Menu For Rfq-845Ci And Rfo-845Ci
4.2. CI menu for RFQ-845CI and RFO-845CI In the CI menus, settings of CA modules can be made for RFQ-845CI and RFO-845CI. The buttons for opening the CI menu will be activated after the modules have been plugged in and initialised. Active buttons for the CI menu. -
Page 32: Decryption Of Programmes
Operation instructions | Serie RFQ-845 and Serie RFO-845 4.3. Decryption of programmes Scrambled programmes are indicated by the abbreviation CA in the encryption column of the tuner table. By default, encryption is disabled. The programm will be transferred to the modulator in encrypted form and must be decrypted when reaching the receiver. -
Page 33: Technical Data
5. Technical data 5.1. Input multituner RFQ-845 RFO-845 Ducts Receiver 4 × 8PSK/QPSK 8 × 8PSK/QPSK Input Input frequency range TERR | 48…860 MHz | 950…2150 MHz Input level TERR | SAT 45…85 dBµV | 43...84 dBµV/-65 … -25 dBm LNB voltage 13/17 V;...
Need help?
Do you have a question about the RFQ-845 and is the answer not in the manual?
Questions and answers