For Your Safety - Panasonic KX-TG1061 Operating Instructions Manual

Temporary Confidential
TG106x.book Page 2 Tuesday, October 28, 2008 3:25 PM

For your safety

To prevent severe injury and loss of life/
property, read this section carefully
before using the product to ensure
proper and safe operation of your
product.
WARNING
Power connection
L Use only the power source marked on
L Do not overload power outlets and
L Completely insert the AC
L Regularly remove any dust, etc. from
L Unplug the product from power outlets
L Unplug from power outlets and never
L Never touch the plug with wet hands.
2
the product.
extension cords. This can result in the
risk of fire or electric shock.
adaptor/power plug into the power
outlet. Failure to do so may cause
electric shock and/or excessive heat
resulting in a fire.
the AC adaptor/power plug by pulling
it from the power outlet, then wiping
with a dry cloth. Accumulated dust
may cause an insulation defect from
moisture, etc. resulting in a fire.
if it emits smoke, an abnormal smell,
or makes an unusual noise. These
conditions can cause fire or electric
shock. Confirm that smoke has
stopped emitting and contact the
Panasonic Call Center at 1-800-211-
PANA (1-800-211-7262).
touch the inside of the product if its
casing has been broken open.
Danger of electric shock exists.
Installation
L To prevent the risk of fire or electrical L To prevent the risk of fire or electrical
shock, do not expose the product to
shock, do not expose the product to
rain or any type of moisture.
rain or any type of moisture.
L Do not place or use this product near
L Do not place or use this product near
automatically controlled devices such
automatically controlled devices such
as automatic doors and fire alarms.
as automatic doors and fire alarms.
Radio waves emitted from this product
Radio waves emitted from this product may cause such devices to malfunction
resulting in an accident.
may cause such devices to
L Do not allow the AC adaptor or telephone
malfunction resulting in an accident.
line cord to be excessively pulled, bent or
L Do not allow the AC adaptor or
placed under heavy objects.
telephone line cord to be excessively
L Do not excessively pull the corded
pulled, bent or placed under heavy
handset cord from the base unit. This may
objects.
cause the base unit to fall, resulting in injury.
Operating safeguards
L Unplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners.
L Do not disassemble the product.
L Do not spill liquids (detergents,
cleansers, etc.) onto the telephone
line cord plug, or allow it to become
wet at all. This may cause a fire. If the
telephone line cord plug becomes
wet, immediately pull it from the
telephone wall jack, and do not use.
Medical
L Consult the manufacturer of any
personal medical devices, such as
pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. (The product
operates in the frequency range of
1.92 GHz to 1.93 GHz, and the RF
transmission power is 115 mW
(max.).)
L Do not use the product in health care
facilities if any regulations posted in
the area instruct you not to do so.
Hospitals or health care facilities may
be using equipment that could be
sensitive to external RF energy.