Troubleshooting - Fusion MS-RA205 Quick Start Manual & Installation Instructions

TROUBLESHOOTING

RESET
Should the stereo become unresponsive. Follow the below steps:
1. Press and hold the 'Power' button for 10 seconds to reset the stereo.
2. Reset your iPod/iPhone/MTP device
3. Remove all power for 1 minute and then reconnect.
FACTORY RESET
The factory reset function will return all settings in the MS-RA205 to the factory default
value.
Warning: All AM, FM station presents are erased. Tuner regions are reset to USA. All
zones are enabled and zone settings, tone, subwoofer filter settings, source settings
and device name are returned to default values.
To reset your MS-RA205 to factory default values:
1. Press the Menu Key.
2. Select Settings > Update� Select Factory reset. All settings will be
restored
to the factory default. At the completion of the reset process the stereo will
automatically power down and restart.
iPod
Why does my FUSION Head unit keep locking up when connected to my iPod/
iPhone?
If you are experiencing software lock-ups or your unit freezes:
• Reset your iPod/iPhone (see Apple website from model-specific
information).
This should resume normal operation.
• Make sure you have the latest version of iTunes and the latest operating
software in your iPod/iPhone. It is important to update software when
Apple
releases new versions. If you are connected via a dock, ensure you are using
the correct sleeve and the connection to the Head unit is secure.
Note: After any IOS update to your Apple iPhone we recommend resetting the iPhone to
ensure correct operation. Press and hold the Sleep/Wake button and the Home button together
for at least ten seconds, until the Apple logo appears.
Will my iPod/iPhone connect to my FUSION product if the battery is flat?
No. It will take a number of minutes for the Apple product to get a minimum level of
charge before it can connect and become operational. Please connect and wait for the
unit to initialise.
My iPod/iPhone will not connect to the head unit while in a FUSION dock
accessory.
If your Head unit displays "Not Connected" while using iPod as input source:
• Check that you are using the correct sleeve combination. If you have the incorrect
sleeve combination this could prevent the iPod connector from mating correctly.
It could also damage the connector in the dock or your iPod/iPhone itself.
26
If you are uncertain which iPod model you have, go to http://www.apple.com/support/
to get the correct model information for your iPod.
If you are still unable to connect once you know for certain you have the correct iPod/
iPhone–sleeve combination:
• Ensure that you have the latest version of operating software installed in
your iPod/iPhone and the latest iTunes version. To do this, connect your iPod/
iPhone to iTunes and it will check and, if necessary, prompt you to download
the latest version.
If you are still unable to connect:
• Contact your FUSION dealer or contact FUSION via the tech email on the
FUSION website.
Problem Solution
Bluetooth
Why does my If you have installed the MS-BT200 Bluetooth module or SiriusXM Tuner
FUSION Head Unit (USA Only) you will need to enable the source. This operation will be
not see my determined by the Tuner region you have selected.
MS-BT200
Tuner Region - USA
Bluetooth
When USA Tuner region is selected, press the menu button and select
Module?
Settings>Sources>Accessory then select the source to enable SiriusXM or
Bluetooth.
Tuner Region - Australasia-Europe-Japan
In these Tuner regions once the MS-BT200 is installed and connected the
source will be available.
Why does my The availability of song information such as song title, artist name, track
Bluetooth source duration and album cover artwork is dependent on the capability of your
not display all phone and music application. Album cover artwork and Shuffle/Repeat
song information Status icons are not supported over Bluetooth.
My Bluetooth Bluetooth performs best with line-of-sight operation. Ensure the music
audio is device is not covered or obstructed and is located near the Bluetooth
interrupted by module. To prevent interruption to audio streaming over Bluetooth it is
short breaks. recommended that the Discoverable feature is turned off after pairing your
device to the FUSION Stereo.
Problem Solution
MTP Device
Why has my MTP FUSION recommends that folders contain no more than 300 files each.
device become Exceeding this limitation may cause the phone to become unresponsive
unresponsive? and the FUSION Stereo to reset the USB link to the phone.
Note: Different operating systems and phones provide varying levels of
support for MTP. Please refer to www.fusionelectronics.com for device
compatibility information.
Why can't the Music files must be located in a folder using one of the following names.
FUSION stereo The folder must be located in the root directory of your device.
find my music My Music
files? My_Music
mobile
Music
27