Download Print this page

Ginnys PC100 Instruction Manual page 8

Pod brewing system

Advertisement

OPERATING INSTRUCTIONS CONTINUED
5. Place the tea or coffee pod inside the Pod Holder. Press lightly on the
pod to make sure it sits evenly inside the Pod Holder.
IMPORTANT: Make sure the paper lip of the Pod is contained within
the Pod Holder and does not hang over the rim.
CAUTION: Use only specially designed tea or coffee pods. DO NOT USE
ESE pods which are specially designed for espresso pod machines. The
use of loose ground tea or coffee not designed for a Pod Brewing
System may result in poor tea or coffee and could potentially damage
the appliance.
NEVER use torn pods as this could clog the appliance and damage it.
Each pod is pre portioned with the optimal amount of tea or coffee
required per serving.
6. To close the Lid, press down firmy on top of the Lid and hold in place
while pullng the Lever down so the Lid locks into place.
7. Place a mug or cup under the Drip Spout.
NOTE: If using the 5 and 8 ounce setting the cup should hold at least 7
to 10 ounces of liquid.
NOTE: if using the 14 ounce setting the cup should hold at least 16
ounces (travel mug size), or two 10 ounce mugs can be positioned
beneath the Drip Spout to brew two 7.5 ounce cups at the same time.
NOTE: The Drip Spout is height adjustable. Make sure the Drip Spout is
positioned all the way up in order to fill your favorite travel mug. When using
smaller cups or mugs, it is recommended to gently pull the Drip Spout down as
far as possible in prder to prevent splattering of tea or coffee while brewing.
pull it down any further.
8
Ginnys.com

Advertisement

loading

Related Products for Ginnys PC100