WVC Modem which can monitoring and manage of 100 pcs micro inverter. 100pcs micro inverter and one WVC Modem make a group. In the same group, micro inverters and WVC Modem must be installed inthesame phase circuit,WVC Modem’s standard interface is RS232,If there are no RS232 interface on your computer you need to buy the USB To RS232 connector then use the USB port to communicate directly.
Page 4
Communicational PV Micro Inverters Generating System Structure Chart Modem Modem PV panels & Inverters array Quantity of Inverters 100 PV panels & Inverters array Quantity of Inverters 100 Modem Modem PV panels & Inverters array Quantity of Inverters 100 PV panels & Inverters array Quantity of Inverters 100...
2.2 Equipment components WVC Modem standrd components including: 1.WVC Modem unit. Power line/plug Signal line Signal lamps Power light 2. One RS232 serial connections...
USB To RS232 connector then use the USB port to communicate directly.). And the details installation like below: 1. Connect the serial port of the female contact of lunk to WVC Modem serial port and tighten the screw on both ends of the connections, show likes below:...
2.4 WVC-Modem Instructions WVC Modem will start to wrok after power on. WVC Modem is a communication and data trunking. There is no function keys on the Modem, we just need to keep it continuous power supply. Parts of operation order will automatically complete by WVC Modem and Monitoring System will manually or automatically complete the rest instructions.
2.6 Equipment reboot It is simple to reboot WVC Modem:Turn WVC Modem power off, then wait for seconds to restore power supply; 2.7 Disconnect sequence According to WVC Modem' serial port connection, please DO NOT disconnect or install WVC Modem to keep the hardware safe when power on.