Black Backing (Audioweave Only) - EluneVision EV-S-1.0 User Manual

4g.
If you are already using the inner slot, and still need more tension, you
will need to pull on the screen fabric manually to tighten it, then rest the
fabric on the springs and let the springs hang on to the fabric. Locate the
wrinkles on the screen and the springs that are near them. Start from the
spring closest to the wrinkle and insert the Installation Hook directly into
the fabric sleeve. Make sure the installation hook is over the fiber plastic
rod and not the springs or the fabric alone. Pull the spring upwards and
away from the frame.
First, pull the installation hook away from the edge. This will stretch the
screen fabric in the viewable area.
Repeat the above steps for other springs near the wrinkles. Repeat as nec-
15
essary until there are no more wrinkles in the screen fabric. If necessary,
you may also use your hands for this operation described above. Please
wear protective gloves and only pull on the sleeve of the fabric.
ASSEMBLY ASSEMBLY
Black Backing
5.
If your screen is AudioWeave material, your screen will come with a
Black Backing. The smooth side of the Black Backing will be the front.
Place the Black Backing along the top of the back of the Aluminum Frame
where Velcro strips are located. Evenly distribute all four sides on the
Velcro strips.
Take out one screw, flip the corner of the Black Backing over and secure
the screw onto the frame through the Black Backing. Repeat this step, one
screw at a time until all 4 screws are secured.
(AudioWeave Material Only)
16