EluneVision EV-S-1.0 User Manual page 7

3c.
Carefully place the assembled aluminum frame onto the fabric with the
frame's large flat surface against the back (labeled) of the screen as shown
below. Make sure the aluminum frame is centered properly by aligning the
corners of the frame to the corners of the fabric.
Do not stand the frame on its corner as the sharp edge will dam-
age the screen fabric.
3d.
Flip over the sides of the fabric with plastic rods onto the edges of the
aluminum frame, as illustrated below:
11
ASSEMBLY ASSEMBLY
4a.
The fabric and the frame will be joined with springs. First the corners will
be secured, then the sides will be secured starting from the corners and
moving towards the middle. The shorter sides should be secured first for
optimal tension. The priority that the springs should be secured is below.
3
1
2
2
1
3
4b.
Select a corner and place springs on each side of it as shown below. Make
sure the springs are in the direction so that the larger and more circular
hook faces the rods while the shorter hook is inserted into the middle slot
of the aluminum frame.
3
1
2
2
1
3
Inner Slot
Middle Slot
Outer Slot
12