CLEARING AN EMERGENCY
ALERT E
(CONVENTIONAL OPERATION ONLY)
To Clear an Emergency Alert
1
Press any button on the radio to
cancel the Emergency Alert tone.
2
Press (or activate) an external push
button or foot switch.
Note: You must press an external switch to clear
the visible Emergency Alias and display the
next queued Emergency Alias, if present.
You must clear all decoded Emergency
Alerts before encoding (sending) your own
Emergency Alert.
SENDING AN EMERGENCY
REMOTE MONITOR
(CONVENTIONAL OPERATION ONLY)
As your radio responds to an Emergency Alert,
only the Emergency Queue menu is available.
To Access the Emergency Queue Menu
) to enter Menu Mode.
1
2
The radio
displays the list
of aliases
currently in the
Emergency
queue, similar to
that shown,
oldest to newest.
z or y to view the next oldest
3
Emergency Remote Monitor packet and
to choose the packet to send.
4
Press the PTT to send the packet.
MDC CALL 01
53
English