Using Media Browser; Setting The Wireless Network - LG 15LW1R User Manual

Using Media Browser
43
Using
Media Browser
Setting the wireless network
To
use
the Media Browser
on
your wireless
TV,
you will first need
to configure
your
computer
network and install the Media
Library
software.
If your
computer
does not have
a
wireless LAN card,
one
will need to be purchased and installed.
You should purchase the wireless LAN card (or Access Point(AP)) separately 802.11g adaptor (or 802.11g Access Point(AP)) that complies with Wi-Fi.
You cannot
use
the 802.11a wireless LAN card (or, 802.11a Access Point(AP)) for this wireless TV.
We recommend that you
use
the USB
type
adaptor that is easy to configure,
or
the wireless LAN card that
runs
in 802.11g only.
Setting method 1
1
Connect the power to the wireless TV.
Wireless TV
DC power
adaptor
2
Turn
on
the wireless TV.
Switch
to
the 'Media Browser'
by pressing
TV/MEDIA button.
'SERVER FINDING'
or
'SEARCH FAILURE' window
will appear
on
the TV
screen as
shown in the
figure.
Do
not
click the
[OK]
on
the
screen
but take the
following steps.
Upper side of the wireless TV Remote control Remote control
or
or
Power cord
Setting method 1
Setting method 2
There
are
two methods for setting the wireless network.
If you
use
the wireless LAN card for the first
time,
take the
steps
described in the
'Setting
method 1'.
If you're familiar with wireless LAN card
use,
take the
steps
described in the 'Setting method 2'. (See
page
50)