Cellular Datacard; Realtime Network Traffic; Logout - Nexaria NEX-SH-B109 Instructlon Manual

Cellular Datacard

Cellular Datacard
• Enable or disable the router's ability to access the Internet through a datacard • Enable or disable the router's ability to access the Internet through a datacard
• Select Service type: UMTS/GPRS, CDMA (default), or EV-DO. • Select Service type: UMTS/GPRS, CDMA (default), or EV-DO.
• Insert Access Point (APN), PIN code, Username, and Password as indicated by your 3G/4G wire • Insert Access Point (APN), PIN code, Username, and Password as indicated by your 3G/4G wire
less provider. less provider.
• Select to use the Peer DNS or an optional location. Input DNS Server information in Wired Interfaces. • Select to use the Peer DNS or an optional location. Input DNS Server information in Wired Interfaces.
• Enable Keep-Alive to determine it the connection is up. Router well re-initilize connection if • Enable Keep-Alive to determine it the connection is up. Router well re-initilize connection if
connection is down. connection is down.
• Input time (in seconds) of inactivity until link is disconnected. • Input time (in seconds) of inactivity until link is disconnected.
NOTE: Settings are auto-populated when an activated compatible datacard is inserted. NOTE: Settings are auto-populated when an activated compatible datacard is inserted.

Realtime Network Traffic

Realtime Network Traffic
The Network Traffic status screen shows current traffic status of active interfaces, such as the LAN, the The Network Traffic status screen shows current traffic status of active interfaces, such as the LAN, the
connected Datacard, and the WAN. connected Datacard, and the WAN.

Logout

Logout
Here you will be logged out of administrative mode. You will be returned to the login screen. Here you will be logged out of administrative mode. You will be returned to the login screen.
W Wired Interfaces.