Table of Contents
Advertisement
Connecting to the Router Main Page for Installation and Configurations Settings
Connecting to the Router Main Page for Installation and Configurations Settings
Follow the steps below to access the Router and perform installation and configure settings:
Follow the steps below to access the Router and perform installation and configure settings:
1) Open a web browser on your computer connected to the router's LAN port by and Ethernet cable.
1) Open a web browser on your computer connected to the router's LAN port by and Ethernet cable.
2) Enter the IP address of the Router in the URL line of your web browser.
2) Enter the IP address of the Router in the URL line of your web browser.
NOTE: If you have changed the router's default IP address, enter that address instead of the one above.
NOTE: If you have changed the router's default IP address, enter that address instead of the one above.
3) Type "admin" in the Password field. If you have changed the password, enter the new one in this
3) Type "admin" in the Password field. If you have changed the password, enter the new one in this
field. NOTE: Default Username is "root".
field. NOTE: Default Username is "root".
4) Click the "Login" button.
4) Click the "Login" button.
5) You will be greeted by the iconic home page.
5) You will be greeted by the iconic home page.
Setup Wizard
Setup Wizard
Select the Setup Wizard Icon. Select the Next button to proceed with the indicated steps of the automated
Select the Setup Wizard Icon. Select the Next button to proceed with the indicated steps of the automated
setup process.
setup process.
1) Change your administration password. It is recommended that the default password (admin) be replaced
1) Change your administration password. It is recommended that the default password (admin) be replaced
for security reasons. Enter your new password and then re-enter to confirm. Select Next to retain any
for security reasons. Enter your new password and then re-enter to confirm. Select Next to retain any
changes and move to the next step.
changes and move to the next step.
2) Configure your Wired Internet connection.
2) Configure your Wired Internet connection.
a. During the boot up process of the
a. During the boot up process of the
router if your wide area network (WAN)
router if your wide area network (WAN)
Ethernet cable is plugged into the WAN
Ethernet cable is plugged into the WAN
port of the router, the router will auto-
port of the router, the router will auto-
matically be connected to your ISP.
matically be connected to your ISP.
b. If your ISP requires you to setup the
b. If your ISP requires you to setup the
WAN as a PPPoE or PPTP, you will
WAN as a PPPoE or PPTP, you will
need to enter your ISP's required infor-
need to enter your ISP's required infor-
mation into the proper fields.
mation into the proper fields.
i. PPPoE. Typical entries in-
i. PPPoE. Typical entries in-
clude the Username and Password
clude the Username and Password
ii. PPTP. Typical entries in-
ii. PPTP. Typical entries in-
clude the Username, Password, and the PPTPServer Name.
clude the Username, Password, and the PPTPServer Name.
3a) Configure your wireless settings.
3a) Configure your wireless settings.
This step allows you to change whether the Wi-Fi is enabled, the channel on which the Wi-Fi
This step allows you to change whether the Wi-Fi is enabled, the channel on which the Wi-Fi
is broadcast on, the wireless mode (b,g,n or mixed), the name that is broadcast, the security and encryption
is broadcast on, the wireless mode (b,g,n or mixed), the name that is broadcast, the security and encryption
type, and the key (password) to access the broadcasted Wi-Fi signal.
type, and the key (password) to access the broadcasted Wi-Fi signal.
• Disable only if you do not want anyone accessing the router wirelessly.
• Disable only if you do not want anyone accessing the router wirelessly.
• Change channel if other wireless devices are interfering with the router. By default the router will
• Change channel if other wireless devices are interfering with the router. By default the router will
auto-select the channel.
auto-select the channel.
• Select the wireless mode, choose from b,g,n or a mix.
• Select the wireless mode, choose from b,g,n or a mix.
• The router's mode is factory set to provide (Access Point)
• The router's mode is factory set to provide (Access Point)
• Change the Network Name (ESSID) to whatever name you wish to be broadcasted
• Change the Network Name (ESSID) to whatever name you wish to be broadcasted
• Hiding the ESSID does not disable the WiFi signal and should not be thought of as security setting.
• Hiding the ESSID does not disable the WiFi signal and should not be thought of as security setting.
Initial 3G/4G Wireless Setup
Initial 3G/4G Wireless Setup
http://192.168.1.1
http://192.168.1.1
Advertisement
Table of Contents
