Chart Data; Showing Dual Chart Types - Lowrance HDS Gen3 Polaris Operator's Manual

* Optional chart items
Note:
Ú You turn the optional images on/off individually. For
more information, see "Chart settings" on page 35.

Chart data

The system is delivered with different embedded cartography
depending on region.
All units support Polaris HD Imagery cards and Insight charts from
Navico including Insight Genesis. The system also supports
Navionics Gold, Platinum+ and Navionics+, C-MAP MAX-N/MAX-N+
by Jeppesen as well as content created by variety of third party
mapping providers in the AT5 format. For a full selection of available
charts please visit insightstore.navico.com, c-map.jeppesen.com or
navionics.com.
Note:
Ú Insight charts are referred to as Lowrance in the
menu.
Charts on chart cards are shared over the Ethernet network, so only
one chart card per vehicle is required.
Note:
Ú The system does not automatically switch to
embedded cartography if the chart card is removed. A low-
resolution chart will be displayed until you re-insert the
card or manually switch back to the embedded
cartography.

Showing dual chart types

If you have different chart types available - embedded, in the card
slot, or on the Ethernet network - you can show two different chart
types simultaneously on a page with two chart panels.
You can select a dual chart panel by pressing and holding the Chart
application button on the Home page, or by creating a favorite
page with two chart panels.
Charts | HDS Gen3 Polaris Operator Manual
29