Table of Contents
Advertisement
STEP 3
Connect the Sensor wire (14) with the wires of
computer (8).
Then insert the Console (8) onto the console
bracket of Handlebar (5)
STEP 4
First of all, please check the right and left
marked on the pedal as shown in illustration. "R"
is "Right" and "L" is "Left. Please install the right
pedal (7R) in the right Crank ( 6R) and install the
left pedal (7L) in the left Crank (6L) . Please turn
the left pedal anticlockwise and turn the right
pedal clockwise to fix them.
STEP 5
Attach the Saddle (16) on the Saddle post (4)
with Nylon nut (10), Flat washer (9), then insert
the Saddle post (4) to the rear post of Main
frame(1).
The height of the saddle (16) should be adjusted
to the position that person sits on the saddle,
puts his foot on the pedal and bends his knee
lightly.
7
Advertisement
Table of Contents
