Assembly - Weslo WLIVEX 30017.0 User Manual

ASSEMBLY

• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you finish all assembly steps.
• Left and right parts are marked "L" or "Left" and "R"
or "Right."
• To identify small parts, see page 13
• As you assemble the exercice bike, use the draw-
ings below to identify small parts. The number in
parentheses below each drawing is the key number
STEP 1
Fix the Front stabilizer (2) and Rear stabilizer
(3) to the Main frame (1) with the Carriage bolts
(20), Arc washers (19) and Acorn nuts (18) as
shown.
STEP 2
Fix the Handlebar (5) to the Main frame (1)
with the Inner hex bolt (12), Arc washer (13).
of the part, from the PART LIST near the end of this
manual. The number following the parentheses is
the quantity needed for assembly.
• In addition to the included tool(s), assembly requires
the following tools:
• one adjustable wrench
• one Phillips screwdriver
• Note: If a part is not in the hardware kit, check to
see if it has been preassembled.