Philips EXP221 Service Manual page 7

INSTRUCTION FOR USE
FEATURES
Programming track numbers
You can store up to 50 tracks to play in a program.
A single track may be stored more than once in the
program.
1 While playback is stopped, select a track with
§ or §
.
2 Press PROGRAM to store the track.
yPROG lights up; the track number
programmed and P with the total number of
stored tracks are displayed.
3 Select and store all desired tracks in this way.
4 Press 2; to start playback of your programmed
tracks.
yPROG is shown and playback starts.
• To add additional tracks to your program, press 9 to stop playing the pro
gram and continue with step 1and 2.
• In stop mode, you can review the program by pressing PROGRAM for more
than 2 seconds.
yThe display shows all the stored tracks in sequence.
Notes: – If you press PROGRAM and there is no track selected, SELECt or
"no Pr" is displayed.
– If you try to store more than 50 tracks, Prog
FULL is displayed.
Clearing the program
• While playback is stopped, press 9 to clear program.
yCLrProg is displayed once, PROG goes off, and the program is
cleared.
Playing tracks repeatedly or in random order-MODE
Note: The program will also be cleared if the power supply is interrupted, or if
the CD-player lid is opened, or if the set switches off automatically.
1 Press MODE repeatedly during playback to select either:
– shuffle: All tracks of the disc are played in
random order once.
– shuffle repeat all : All tracks of the disc are
played repeatedly in random order.
– repeat one : current track is played repeatedly.
– repeat all : The entire disc is played repeatedly.
– shuffle album (with MP3-CDs only):
All the albums are played in random order once.
– shuffle repeat album (with MP3-CDs only):
All the albums are played repeatedly in random
order.
– repeat album (with MP3-CDs only):
All tracks of the current album are played repeatedly.
– shuffle program: All tracks of the program are played in random order
until all of them have been played once
– repeat all program: All tracks of the program are played repeatedly.
– shuffle repeat program: All tracks of the program are played repeatedly in
random order.
– repeat one program: The current track of the program is played repeatedly.
2-4
Playing tracks repeatedly or in random order-MODE
2 Playback starts in the selected mode after 2 seconds.
3 To return to normal playback, press MODE repeatedly until repeat and shuffle
disappear.
ESP ( Electronic Skip Protection )
With a conventional portable MP3 -CD player you might have experienced that
the music stopped e.g. when you were jogging. The Electronic Skip Protection
prevents loss of sound caused by light vibrations and shocks. Continuous playback
is ensured. It also does not protect the unit against any damage caused by drop-
ping!
In this set ESP is default ON. It is possible to set ESP off in audio CD playback
(ESP is always on in MP3 playback ).
• Press MODE for more than 2 seconds.
y ESP disappears.
• Press MODE again for more than 2 seconds.
y ESP is displayed.
RESUME and HOLD
You can interrupt playback and continue (even after an
extended period of time) from the position where
playback stopped (RESUME) and you can lock all buttons
of the set so that no action will be executed (HOLD). Use
the OFF–RESUME–HOLD slider for these functions.
RESUME – continuing from where you have stopped
1 Switch the slider to RESUME during playback to acti-
vate RESUME.
yRESUME is shown.
2 Press 9 whenever you want to stop playback.
3 Press 2; whenever you want to resume playback.
yRESUME is shown and playback continues from where you have
stopped.
• To deactivate RESUME, switch the slider to OFF.
yRESUME goes off.
HOLD – locking all buttons
You can lock the buttons of the set. When a key is pressed, no action will be exe-
cuted. With HOLD activated, you can avoid accidental activation of other func-
tions.
1 Switch the slider to HOLD to activate HOLD.
yAll buttons are locked. HoLd is shown when
you press any button. If the set is switched off,
HOLD ON will be shown shortly when 2; is
pressed.
2 To deactivate HOLD, switch the slider to OFF.
Note: -- you deactivate HOLD by switching the slider to RESUME, you will be
activating the RESUME function.
FEATURES