Table of Contents
Advertisement
5.8 Offset Setting (OFFSET):
Users can manually set the offset value to use as
compensation for the error of the thermocouple
cable that you are currently using.
1. Press and hold the
(OFFSET) button for 1
second to enter settings for the offset value.
2. Press the top
and
bottom buttons to
increase or decrease the offset value; the unit for
every time it is pressed is 0.1°C/°F/K. The setting
range is between±5°C, ±5K and ±9°F.
3. Press the
(Setup) button to save the setting
and exit the setting mode.
To set the offset for another channel, please press
the
button to switch.
The device will automatically save the offset value
set as the default value for the next power ON.
7
Hide quick links:
Advertisement
Table of Contents
