Table of Contents
Advertisement
Assembly / Operating Instructions
Bootcover
1.
To attach bootcover, raise seat extension and attach press
studs underneath the seat extension to the matching press
studs on the inside of the bootcover as shown in image.
2.
Insert the top flap of the
bootcover underneath the
bumper bar.
3.
Insert the two elastic toggles into
the seat liner's side slots on both
sides to secure it into place.
4.
Attach the toggle on the top flap
of the bootcover to the loop to
secure it in place.
WARNING: Always remove bootcover before folding the stroller.
Tether strap
Ensure tether strap is used at all times. Make sure your hand is fed
through the loop as shown in the diagram.
Reversing seat pad
1.
Unclip the two press studs on the behind of the backrest.
11
Hide quick links:
Advertisement
Table of Contents
