Our website contains a lot of technical information, which will be updated in regular periods. Block Diagram Figure 1 shows the block diagram of the IGW/400-UART. UART1 correlates with the RS232 connector (UART1) and the EI/Os correlate with the 14-pin environment interface of the IGW/400-UART.
The green power LED indicates a present supply voltage. This LED is on when the IGW/400-UART is provided with a voltage of 6 - 30 VDC by the power supply. If this LED is off, check the connection between the power supply and the IGW/400-UART.
IGW/400-UART – Mechanical Dimensions MECHANICAL DIMENSIONS All length dimensions have a tolerance of 0.5 mm. Figure 3: Mechanical dimensions of IGW/400-UART S S V E M B E D D E D S Y S T E M S...
Mechanical Dimensions with DIN-Rail Mounting Set All length dimensions have a tolerance of 0.5 mm. Figure 4: Mechanical dimensions of IGW/400-UART with DIN-rail mounting set S S V E M B E D D E D S Y S T E M S...
IGW/400-UART – Mechanical Dimensions Mechanical Dimensions with Wall Mounting Set All length dimensions have a tolerance of 0.5 mm. Figure 5: Mechanical dimensions with wall mounting set S S V E M B E D D E D S Y S T E M S...
IGW/400-UART – Mechanical Dimensions Drilling Template for Wall Mounting Set All length dimensions have a tolerance of 0.5 mm. Figure 6: Drilling template for wall mounting set S S V E M B E D D E D S Y S T E M S...
Need help?
Do you have a question about the IGW/400-UART and is the answer not in the manual?
Questions and answers