Table of Contents
Advertisement
PS/2-Driver works smoothly with a PS / 2 mouse but if you do not have a PS / 2 mouse you
should leave this box unchecked to avoid compatibility problems.
5."Setup Type"
We recommend "None" (see the picture upper right) for the calibration setting. A calibration will
be performed every time your PC starts up if you choose "Every system boot up". If you
choose "Next system boot up" a calibration will be performed on the next system reboot. You
can carry out a calibration at any time after the TouchKit program is installed. (See "Setting up
the faytech Touch software".) After making your selection on this screen, click "Next".
6."TouchKit - InstallShield Wizard":
Connect the USB cable now and press "OK". If the "New Hardware Found" dialog of Windows
opens, please cancel it.
14
Advertisement
Table of Contents
